Cpu Configuration - ASROCK P43C-ME User Manual

3.4.1 CPU Configuration

3.4.1 3.4.1 CPU Configuration CPU Configuration CPU Configuration
3.4.1 3.4.1 CPU Configuration
BIOS SETUP UTILITY
Advanced
CPU Configuration
Overclock Mode
CPU Frequency (MHz)
PCIE Frequency (MHz)
Boot Failure Guard
Spread Spectrum
Ratio Status Unlocked (Min:12, Max:17)
Ratio CMOS Setting 17
Enhanced Halt State
Intel (R) Virtualization tech.
CPU Thermal Throttling
No-Execute Memory Protection
Intel (R) SpeedStep (tm) tech.
Intel (R) C-STATE tech
On-Demand Clock Modulation
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Overclock Mode
Use this to select Overclock Mode. Configuration options: [Auto], [Manual]
and [Optimized]. The default value is [Auto]. If you select [Manual], Untied
Overclocking function is enabled. Please refer to page 34 for the details of
Untied Overclocking Technology. Therefore, you are allowed to adjust the
Host frequency and PCIE frequency in the following two items.
CPU Frequency (MHz)
Use this option to adjust CPU frequency.
PCIE Frequency (MHz)
Use this option to adjust PCIE frequency.
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
Spread Spectrum
This item should always be [Auto] for better system stability.
Ratio Status
This is a read-only item, which displays whether the ratio status of this
motherboard is "Locked" or "Unlocked". If it shows "Unlocked", you will find
an item Ratio CMOS Setting appears to allow you changing the ratiovalue
of this motherboard.
Ratio CMOS Setting
If the ratio status is unlocked, you will find this item appear to allow you
changing the ratio value of this motherboard.
Enhance Halt State
All processors support the Halt State (C1). The C1 state is supported
through the native processor instructions HLT and MWAIT and requires no
hardware support from the chipset. In the C1 power state, the processor
maintains the context of the system caches.
This should be enabled
in order to enable or
[Auto]
disable the "Enhanced
[200]
Halt State".
[100]
[Enabled]
[Auto]
[17]
[Disabled]
Select Screen Select Screen
[Enabled]
Select Item Select Item
[Enabled]
+- +- Change Option Change Option
[Disabled]
F1 F1 General Help General Help
[Auto]
F9 F9 Load Defaults Load Defaults
[Disabled]
F10 F10 Save and Exit Save and Exit
[Auto]
ESC ESC Exit Exit
4 2 4 2 4 2
4 2 4 2