Oc Tweaker Screen - ASROCK P41C-DE - V1.0 User Manual

3.3 OC T 3.3 3.3 3.3 3.3 OC T OC T OC T OC Tweak weaker Screen weak weak weak er Screen er Screen er Screen er Screen
In the OC Tweaker screen, you can set up overclocking features.
Main OC Tweaker
OC Tweaker Settings
Load CPU EZ OC Setting
DRAM Frequency
DRAM Command Rate
DRAM Timing Configuration
Ratio Status
Ratio CMOS Setting
Intel (R) SpeedStep (tm) tech.
Overclock Mode
CPU Frequency (MHz)
PCIE Frequency (MHz)
Vcore
CPU Voltage
DRAM Voltage
NB Voltage
SB Voltage
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Load CPU EZ OC Setting
You can use this option to load CPU EZ overclocking setting. Configuration
options: [Press Enter], [CPU 2.64GHz], [CPU 2.88GHz], [CPU 3.00GHz],
[CPU 3.12GHz] and [CPU 3.27GHz]. Please note that overclocing may
cause damage to your CPU and motherboard. It should be done at your
own risk and expense.
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s)
inserted and assigns appropriate frequency automatically. You may select
[400MHz DDR3_800], [533MHz DDR3_1066] or [667MHz DDR3_1333] for
DDR3 or [266MHz DDR2_533], [333MHz DDR2_667], [400MHz DDR2_800]
or [533MHz DDR2_1066] for DDR2. The configuration options depend on
the CPU and memory module you adopt on this motherboard. Please refer to
page 8 for the CPU FSB frequency and its corresponding memory support
frequency.
DRAM Command Rate
Use this item to adjust DRAM Command Rate. Configurationoptions: [1N],
[2N] and [Auto].
3 2 3 2 3 2
3 2 3 2
BIOS SETUP UTILITY
Advanced H/W Monitor Boot
Overclocking may cause
damage to your CPU and
[Press Enter]
motherboard.
It should be done at
[Auto]
your own risk and
[Auto]
expense.
Unlocked (Min:06, Max:17)
[17]
17
[Disabled]
[Auto]
[200]
[100]
Enter Go to Sub Screen
: 1.366 V
F1
[Auto]
F9
1.53V [Auto]
F10
1.251V [Auto]
ESC
1.527V [Auto]
Security Exit
Select Screen
Select Item
General Help
Load Defaults
Save and Exit
Exit