ADTRAN jobAid SFP48I Installation

CLEI: SOOTAD8J_ _
Product P/N: 1184560P2
DESCRIPTION
The Small Form-Factor Pluggable OC-48 Intermediate-
Reach (SFP48I) plugs into ADTRAN OC-48 modules
designed to accept Small Form-factor Pluggables (SFPs).
Installed into an appropriate host module, the SFP48I
provides an OC-48 interface to the supporting system.
NOTE: To ensure compatibility, refer to the documentation
provided with the host module.
The following features are supported on the SFP48I:
♦
SONET OC-48 (2488.32 Mb/s) 1310 nm, Intermediate-
(IR), single-mode, 2-fiber operation
reach
♦ Optical distance: 15 km maximum
CAUTION: Due to compliance certification requirements,
only SFPs supplied by ADTRAN are to be used
with the host module. ADTRAN cannot certify
system integrity with other SFPs.
Operational Specifications
♦ Optical Specifications:
– Optical transmit level: –5 dBm to 0 dBm
– Optical receive level: –18 dBm to 0 dBm
– Optical budget: 12 dB
– Optical connectors: LC
♦ Extended Environmental Support:
– Operational temperature range: –40°C to +65°C
– Storage temperature range: –40°C to +100°C
– Relative humidity to 95%, noncondensing
Small Form-Factor Pluggable
OC-48 Intermediate-Reach
INSTALLATION
To install the SFP48I into an appropriate module,
perform the following steps:
1. Inspect the SFP48I. If damaged, file a claim with the
carrier and then contact ADTRAN Customer Service.
2. Remove the black safety cap from the optical
connectors of the SFP48I.
3. Insert the SFP48I into the receptacle on the circuit
board of the host module, with the manufacturer's
label facing outward. Slide the SFP48I all the way
into the receptacle.
4. Using thumb and forefinger, firmly squeeze the
receptacle and SFP48I together, to ensure a proper
connection.
NOTE: The latch on the SFP is for removal only.
5. Continue the installation and turn-up of the host
module using the instructions in the Job Aid
provided with that module, or using the Installation
and Maintenance Practice (I&M), available online at
www.adtran.com.
PROVISIONING
The SFP48I is not directly provisionable. To provision the
SFP48I, access the menu system of the host module.
Refer to the "Provisioning" section of the Job Aid or I&M
provided with the host module for provisioning details.
Issue Date: 0707
Document P/N: 61184560P2-22B