ASROCK NF6-GLAN User Manual page 8

Hide thumbs Also See for NF6-GLAN:
Table of Contents

Advertisement

CAUTION!
1.
This motherboard supports Untied Overclocking Technology. Please read
"Untied Overclocking Technology" on page 30 for details.
2.
This motherboard supports Dual Channel Memory Technology. Before
you implement Dual Channel Memory Technology, make sure to read
the installation guide of memory modules on page 14 for proper
installation.
3.
Whether 1066MHz memory speed is supported depends on the AM2+ CPU
you adopt. If you want to adopt DDR2 1066 memory module on this
motherboard, please refer to the memory support list on our website for
the compatible memory modules.
ASRock website
http://www.asrock.com
4.
Due to the operating system limitation, the actual memory size may be
less than 4GB for the reservation for system usage under Windows
and Windows
®
Vista
TM
. For Windows
bit with 64-bit CPU, there is no such limitation.
5.
Before installing SATAII hard disk to SATAII connector, please read the "SATAII
Hard Disk Setup Guide" on page 24 to adjust your SATAII hard disk drive to
SATAII mode. You can also connect SATA hard disk to SATAII connector
directly.
6.
Power Management for USB 2.0 works fine under Microsoft
TM
TM
Vista
64-bit / Vista
/ XP 64-bit / XP SP1 or SP2 / 2000 SP4.
7.
WiFi header supports WiFi+AP function with ASRock WiFi-802.11g or
WiFi-802.11n module, an easy-to-use wireless local area network
(WLAN) adapter. It allows you to create a wireless environment and
enjoy the convenience of wireless network connectivity. Please visit our
website for the availability of ASRock WiFi-802.11g or WiFi-802.11n
module.
ASRock website
http://www.asrock.com
8.
It is a user-friendly ASRock overclocking tool which allows you to surveil
your system by hardware monitor function and overclock your hardware
devices to get the best system performance under Windows
Please visit our website for the operation procedures of ASRock OC
Tuner. ASRock website: http://www.asrock.com
9.
Although this motherboard offers stepless control, it is not recommended
to perform over-clocking. Frequencies other than the recommended CPU
bus frequencies may cause the instability of the system or damage the
CPU.
®
XP 64-bit and Windows
®
Vista
®
Windows
®
environment.
8 8 8 8 8
®
XP
TM
64-
®

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nf6-glan - v1.2

Table of Contents