Table of Contents
Advertisement
Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA HDD
power connector
USB 2.0 Headers
(9-pin USB6_7)
(see p.10 No. 14)
(4-pin USB8)
(see p.10 No. 13)
WiFi Header
(11-pin WIFI)
(see p.10 No. 25)
If you don't plan to use WiFi+AP function on this motherboard, this header can be
used as a 4-Pin USB 2.0 header to support one USB 2.0 port. To connect the
4-Pin USB device cable to this header, please refer to this
picture for proper installation.
Infrared Module Header
(5-pin IR1)
(see p.10 No. 21)
Internal Audio Connectors
(4-pin CD1)
(CD1: see p.10 No. 23)
Please connect the black end of
SATA power cable to the power
connector on each drive. Then
connect the white end of SATA
connect to the
power cable to the power
power supply
connector of the power supply.
Besides six default USB 2.0
USB_PWR
P-7
P+7
ports on the I/O panel, there are
GND
DUMMY
two USB 2.0 headers on this
1
motherboard. USB6_7 header can
GND
support two USB 2.0 ports, and
P+6
P-6
USB_PWR
USB8 header can support one
USB 2.0 port.
1
GND
P-8 P+8
USB_PWR
This header supports WiFi+AP
USB+5V_2
function with ASRock
NC
NC
GND1
WiFi-802.11g or WiFi-802.11n
NC
+3SVB
module, an easy-to-use wireless
1
local area network (WLAN)
PME#
GND1
D0- D0+
USB+5V_1
adapter. It allows you to create a
wireless environment and enjoy the
convenience of wireless network
connectivity.
This header supports an
IRTX
+5V
DUMMY
optional wireless transmitting
and receiving infrared module.
1
GND
IRRX
This connector allows you
to receive stereo audio input
from sound sources such as
CD1
a CD-ROM, DVD-ROM, TV
tuner card, or MPEG card.
1 9
1 9
1 9
1 9
1 9
Advertisement
Table of Contents
