• Danger! The shredder must be placed on a flat and When using the equipment, a few safety pre- firm surface where it can stand securely. • cautions must be observed to avoid injuries and Always wear gloves and safety goggles when damage.
Page 7
• Keep the air vents clear of dirt. make sure that the loading funnel is properly • After use, unplug the machine and check it for connected to the motor housing and the re- damage. lease screw tightened. • • When you are not using the shredder, keep it If the garden refuse shredder vibrates ex- in a dry place out of the reach of children.
• 2. Layout and items supplied Allow the tool to cool before carrying out any maintenance work, adjustments, etc. • Never use the machine while other people 2.1 Layout (Fig. 1/2) are nearby. Loading funnel inlet • When inserting material take special care Loading funnel to ensure that it does not contain any metal, Motor housing with cutter plate...
• 3. Proper use Do not overload the appliance. • Have the appliance serviced whenever ne- cessary. This electric garden refuse shredder is designed • Switch the appliance off when it is not in use. only for shredding organic garden waste. Place •...
• Insert a screwdriver through the holding hole 6.3 Practical tips • on the axle and secure the wheels with the Be sure to observe the safety instructions screws (see supplied booklet). • • Fit the wheel caps to the wheels; make sure Wear work gloves, goggles and ear protec- that the clips (A) on the wheel caps latch into tion.
Replacement part number of the part required water. For our latest prices and information please go to • Prevent water getting inside the machine at www.Einhell-Service.com all cost. • Check the chassis securing screws from time Spare blade Art. No.: 34.059.30 to time to ensure that they are tight.
9. Disposal and recycling The equipment is supplied in packaging to pre- vent it from being damaged in transit. The raw materials in this packaging can be reused or recycled. The equipment and its accessories are made of various types of material, such as metal and plastic.
Page 13
The reprinting or reproduction by any other means, in whole or in part, of documentation and papers ac- companying products is permitted only with the express consent of the Einhell Germany AG. Subject to technical changes - 13 - Anl_GC-KS_2540_UK_SPK7.indb 13...
* Not necessarily included in the scope of delivery! In the eff ect of defects or faults, please register the problem on the internet at www.Einhell-Service.com. Please ensure that you provide a precise description of the problem and answer the following questions in all cases: •...
We draw attention to the restrictions of this guarantee concerning wear parts, consumab- les and missing parts as presented in the service information included in this operating manual. Warrantor/ Service: Einhell UK Ltd, Unit 10, 1st Floor, Champion‘s Business Park, Arrowe Brook Road, Upton, Wirral, CH49 0UQ - 15 - Anl_GC-KS_2540_UK_SPK7.indb 15 Anl_GC-KS_2540_UK_SPK7.indb 15...
Page 16
Samræmisyfi rlýsing: Við útskurðum samræmi við EU-reglugerð og Οδηγία Εε και πρότυπα για τα προϊόντα stöðlum fyrir vörutegund Declaração de conformidade: Declaramos a conformidade de acordo com a diretiva CE e normas para o artigo Garden Shredder GC-KS 2540 (Einhell) 2014/29/EU 2006/42/EC Annex IV 2005/32/EC_2009/125/EC Notifi...
Standards: BS EN 50434; BS EN IEC 60335-1; BS EN 62233; BS EN IEC 55014-1; BS EN IEC 55014-2; BS EN IEC 61000-3-2; BS EN 61000-3-3 Wirral, 2024.01.17 Tom Chambers, Managing Director Einhell UK Ltd. Archive-File/Record: NAPR031728 Article Number: 34.303.34 I.-No.: 21014...
Need help?
Do you have a question about the GC-KS 2540 and is the answer not in the manual?
Questions and answers