Table of Contents
Advertisement
AGP Mode
The default value of this feature is set to [Auto]. If you install an 8X-AGP
card on this motherboard, you may select [Auto], [8X] or [4X] as the AGP
mode. If the installed AGP card is a 4X-AGP card, then you may set the AGP
mode as [Auto], [4X], [2X], or [1X].
AGP Fast Write
This allows you to enable or disable the feature of AGP fast write protocol
support.
IDE Driving Strength
Select [Normal] or [Strong] for IDE driving strength.
PCI Delay Transaction
Enable PCI Delay Transaction feature will free the PCI Bus when the CPU is
accessing 8-bit ISA cards. Disable this feature when using ISA cards that
are not PCI 2.1 compliant.
OnBoard LAN
This allows you to enable or disable the onboard LAN feature.
OnBoard AC'97 Audio
Select [Enabled] or [Disabled] for the onboard AC'97 Audio feature.
If you use an AMD 754-Pin CPU on the ASRock 754Bridge, which is installed
into the K8 BRIDGE on this motherboard, you will see the below screen and
configuration options for the Chipset Configuration.
Advanced
Chipset Settings
VCCM
Primary Graphics Adapter
AGP Aperture Size
AGP Mode
AGP Fast Write
IDE Drive Strength
PCI Delay Transaction
OnBoard LAN
OnBoard AC'97 Audio
HT Width
HT Speed
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
VCCM
Use this to select VCCM voltage. Configuration options are [Auto], [High],
and [Low]. The default value is [Auto].
BIOS SETUP UTILITY
[Auto]
[PCI]
[64 MB]
[Auto]
[Disabled]
[High]
[Disabled]
[Enabled]
[Enabled]
[Auto]
[Auto]
3 0
3 0
3 0
3 0
3 0
To set DRAM Voltage.
Select Screen
Select Item
+ -
Change Option
F1
General Help
F9
Load Defaults
F10
Save and Exit
ESC
Exit
Advertisement
Table of Contents
