Table of Contents
Advertisement
ATX 12V Connector
(4-pin ATX12V1)
(see p.8, No. 6)
Power LED Header
(3-pin PWR_LED1)
(see p.8 No. 23)
2.7
2.7
Serial A
Serial A
Serial AT T T T T A (SA
A (SA
A (SAT T T T T A) Hard Disks Installation
A (SA
2.7
2.7 Serial A
2.7
Serial A
A (SA
This motherboard supports Serial ATA (SATA) hard disks and RAID functions. You
may install SATA hard disks on this motherboard for internal storage devices. This
section will guide you to install the SATA hard disks.
STEP 1: Install the SATA hard disks into the drive bays of your chassis.
STEP 2: Connect the SATA power cable to the SATA hard disk.
STEP 3: Connect one end of the SATA data cable to the motherboard's SATA
connector.
STEP 4: Connect the other end of the SATA data cable to the SATA hard disk.
2.8
2.8
2.8 Hot Plug and Hot Swap F
Hot Plug and Hot Swap Functions for SA
Hot Plug and Hot Swap F
Hot Plug and Hot Swap F
2.8
2.8
Hot Plug and Hot Swap F
K7Upgrade-880 motherboard supports Hot Plug and Hot Swap functions for
SATA Devices.
What is Hot Plug Function?
If the SATA HDDs are NOT set for RAID configuration, it is called "Hot
Plug" for the action to insert and remove the SATA HDDs while the
system is still power-on and in working condition. However, please note
that it cannot perform Hot Plug if the OS has been installed into the SATA
HDD.
What is Hot Swap Function?
If SATA HDDs are built as RAID1 then it is called "Hot Swap" for the
action to insert and remove the SATA HDDs while the system is still
power-on and in working condition.
1
PLED-
PLED+
PLED+
A) Hard Disks Installation
A) Hard Disks Installation
A) Hard Disks Installation
A) Hard Disks Installation
unctions for SA
unctions for SAT T T T T A HDDs
unctions for SA
unctions for SA
2 1
2 1
2 1
2 1
2 1
Please note that it is necessary
to connect a power supply with
ATX 12V plug to this connector
so that it can provides sufficient
power. Failing to do so will cause
the failure to power up.
Please connect a 3-pin power
LED cable to this header.
A HDDs
A HDDs
A HDDs
A HDDs
Advertisement
Table of Contents
