Table of Contents
Advertisement
USB 2.0 Connector
(9-pin USB45)
(see p.7/p.8 No. 18)
Infrared Module Connector
(5-pin IR1)
(see p.7/p.8 No. 19)
Internal Audio Connectors
(4-pin CD1, 4-pin AUX1)
(CD1: see p.7/p.8 No. 28)
(AUX1: see p.7/p.8 No. 29)
Front Panel Audio Connector
(9-pin AUDIO1)
(see p.7/p.8 No. 25)
System Panel Connector
(9-pin PANEL1)
(see p.7/p.8 No. 15)
Chassis Speaker Connector
(4-pin SPEAKER 1)
(see p.7/p.8 No. 16)
Chassis Fan Connector
(3-pin CHA_FAN1)
(see p.7/p.8 No. 13)
CPU Fan Connector
(3-pin CPU_FAN1)
(see p.7/p.8 No. 2)
USB_PWR
P-5
P+5
GND
DUMMY
1
GND
P+4
P-4
USB_PWR
IRTX
+5V
DUMMY
1
GND
IRRX
AUX-L
GND
AUX1
GND
AUX-R
CD-L
GND
CD1
GND
CD-R
GND
+5VA
BACKOUT-R
BACKOUT-L
1
AUD-OUT-L
DUMMY
AUD-OUT-R
MIC-POWER
MIC
PLED+
PLED-
PWRBTN#
GND
1
DUMMY
RESET#
GND
HDLED-
HDLED+
1
SPEAKER
DUMMY
DUMMY
+5V
GND
+12V
CHA_FAN_SPEED
There are 4 default USB 2.0
ports on the rear panel. If the
rear USB ports are not sufficient,
this USB 2.0 connector is
available to support 2 additional
USB 2.0 ports.
This connector supports an
optional wireless transmitting
and receiving infrared module.
These connectors allow you to
receive stereo audio input from
sound sources such as a CD-
ROM, DVD-ROM, TV tuner card,
or MPEG card.
This is an interface for front panel
audio cable that allows conve-
nient connection and control of
audio devices.
This connector accommodates
several system front panel
functions.
Please connect the chassis
speaker to this connector.
Please connect a chassis fan
cable to this connector and
match the black wire to the
ground pin.
Please connect a CPU fan cable
to this connector and match
the black wire to the ground pin.
Hide quick links:
Advertisement
Table of Contents
