ASROCK K7S41 User Manual page 25

Chipset Configuration:
Advanced
Chipset Configuration
Onboard VGA Share Memory
AGP Aperture Size
USB Controller
USB 2.0 Controller
USB Device Legacy Support
DRAM CAS Latency
Over Vcore Voltage
F1:Help
Esc:Previous Menu
OnBoard VGA Share Memory: This allows you to select the size of share
memory for onboard VGA. Onboard VGA will get better resolution if larger
size of share memory is selected.
AGP Aperture Size: It refers to a section of the PCI memory address range
used for graphics memory. It is recommended to leave this field at the
default value unless the installed AGP card's specifications requires other
sizes.
USB Controller: Use this to enable or disable the use of USB controller.
USB 2.0 Controller: Use this to enable or disable USB 2.0 controller. If this is
set to [Disabled], USB Controller will run at USB 1.1.
USB Device Legacy Support: Use this to enable or disable the support to
emulate legacy I/O devices such as mouse, keyboard,... etc.
DRAM CAS Latency: This is used to adjust the means of memory accessing.
Configuration options: [Auto], [2T], [2.5T], [3T].
Please note that not all the DDR DIMMs can support CAS latency=3T.
Over Vcore Voltage: This feature allows you to increase the CPU Vcore
voltage by 3% or 6%. The default value is [Disabled].
It is not recommended to enable "Over Vcore Voltage" feature.
Doing so may cause CPU damage.
AMIBIOS SETUP UTILITY - VERSION 3.31a
Auto
64M
Enabled
Enabled
Disabled
Auto
Disabled
:Select Item +/-:Change Values
Enter:Select
[ Setup Help ]
<Enter> to set the
share memory size of
the onboard VGA..
F9:Setup Defaults
F10:Save & Exit
Sub-Menu