CyberPower UP625 User Manual page 5

◆
Power Button
Press the power button to turn the UPS ON or OFF
◆
Power On Indicator
This LED is illuminated when the utility condition is normal and the UPS
outlets are providing "clean power", free of surges and spikes.
◆
Using Battery Indicator
This illuminates during utility failure, indicating that the battery is
supplying power to the battery-power supplied outlets.
◆
Battery Backup and Surge Protection Outlets
Provides three battery powered and surge protected outlets for
connected equipment to insure temporary uninterrupted operation
during a power failure and protection against surges and spikes.
◆
Surge Protection Outlets
Provides three surge protected only outlets for connected equipment.
◆
Circuit Breaker Reset for Overload Protection
Resetable circuit breakers provide optimal overload protection.
an overload occurs, the circuit breaker will pop and the UPS will switch
to battery back-up mode. Unplug at least one item from the UPS and
press the circuit breaker in to reset it.
◆
Serial Port to PC
This port allows connection and communication from the DB-9 serial or
USB port on the computer to the UPS unit. The UPS communicates
its status to the PowerPanel Plus™ software. This interface is also
compatible with the UPS service provided by Windows NT, Windows
2000 and Windows XP.
◆
Network Protection Ports (RJ45/RJ11)
These ports protect standard network cables and telephone cables.
UP625/ UP825
Guaranteed Uninterruptible Power System
3
When