Installing Your Ups System; Unpacking; Hardware Installation Guide; Basic Operation - CyberPower UP625 User Manual

Cyberpower systems user manual ups up825,up625

Hide thumbs Also See for UP625:

Table of Contents

INSTALLING YOUR UPS SYSTEM

Inspect the UPS upon receipt. The box should contain the following:

(1) UPS Unit; (1) PowerPanel Plus Software Disk; (1) Serial Interface Cable (DB-9);

(1) Telephone Cable; (1) User's Manual; (1) Warranty Registration Card

1. Connect the equipments to your UPS outlets. Items such as copiers, laser printers,

vacuums, space heaters, or other large electrical devices should not be connected to the

UPS. The power demand of your connected equipment cannot exceed the maximum

total power rating of your UPS.

2. Connect your UPS power cord into a two-pole, three-wire

grounding receptacle only. Please avoid using extension

cords and adapter plugs. (To maintain optimal battery

charge, leave the UPS plugged in at all times.)

3. Press the UPS power button to turn it on. The "Power On" indicator will be illuminated

Green.

4. Install your optional software and accessories. To use the software, simply connect the

enclosed serial interface cable to the serial port on the UPS and an open serial port on

the computer.

Table of Contents

Up825