Ide Configuration - ASROCK G41M-S User Manual

ACPI HPET Table
Use this item to enable or disable ACPI HPET Table. The default value is
[Disabled]. Please set this option to [Enabled] if you plan to use this
motherboard to submit Windows

3.4.4 IDE Configuration

3.4.4 3.4.4 3.4.4 3.4.4 IDE Configuration IDE Configuration IDE Configuration IDE Configuration
BIOS SETUP UTILITY
Advanced
IDE Configuration
ATA/IDE Configuration
SATAII_1
SATAII_2
SATAII_3
SATAII_4
IDE1 Master
IDE1 Slave
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
ATA/IDE Configuration
Please select [Compatible] when you install legacy OS (Windows
native OS (Windows
[Enhanced].
When [Compatible] is selected
Combined Option
It allows you to select between [SATA 1, SATA 2, SATA 3, SATA 4], [SATA
1, SATA 3, IDE 1], [IDE 1, SATA 2, SATA 4] and [PATA Only]. If it is set to
[SATA 1, SATA 3, IDE 1], then SATAII_2, SATAII_4 will not work. Likewise, if
it is set to [IDE 1, SATA 2, SATA 4], then SATAII_1, SATAII_3 will not work. If
you select [PATA Only], then all SATAII will not work, only IDE will work.
Because Intel
under legacy OS (Windows NT), you have to choose [SATA 1, SATA 2,
SATA 3, SATA 4], [SATA 1, SATA 3, IDE 1], or [IDE 1, SATA 2, SATA 4]
when the installed device is used with legacy OS.
[SATA 1, SATA 2,
SATA 3, SATA 4]
Master SATAII 1, SATAII 2
Slave SATAII 3, SATAII 4
Vista certification.
® TM
Set [Compatible]
when Legacy OS
(MS-DOS, Win NT)
[Enhanced]
device is used.
Set [Enhanced]
[Hard Disk]
when Native OS
[Not Detected]
(Win2000 / XP)
[Not Detected]
is used.
[Not Detected]
[ATAPI CDROM]
[Not Detected]
Select Screen Select Screen
Select Item Select Item
+- +- Change Option Change Option
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
2000 / XP / Vista ) is installed, please select
® TM
ICH7 south bridge only supports four IDE devices
®
[SATA 1, SATA 3,
IDE 1]
SATAII 1
SATAII 3
NT). If
®
[IDE 1, SATA 2,
SATA 4]
SATAII 2
SATAII 4
4 1 4 1 4 1
4 1 4 1