ahead RC Crawler MK23 Flatbed TRX4M Assembly Manual

Hide thumbs Also See for Crawler MK23 Flatbed TRX4M:

Download this manual

ahead RC Crawler MK23 Flatbed

TRX4M

Assembly Manual 

ahead RC

Need help?

Do you have a question about the Crawler MK23 Flatbed TRX4M and is the answer not in the manual?

Page 1 RC Crawler MK23 Flatbed TRX4M Assembly Manual  ahead RC...
Page 2 Required tools and hardware Tools 1.5mm Hex Driver 2.0mm Hex Driver Needle Nosed Pliers Instant Glue Electronics 3mm White LED x2 3mm Orange LED x2 3mm Red LED x2 Hardware Hardware Quantity Check M2*10 Socket head M2.5*15 Socket head ahead RC...
Page 3: Before You Begin
Before you begin Be sure to read through the manual and familiarise yourself with the instructions Visualise a plan to assemble all the pieces Make sure you have all of the hardware and tools Be sure to have enough instant glue Dry ﬁt all parts before painting and assembling Tip: It will help to paint all of the parts before ﬁnal assembly ahead RC...
Page 4 Assembling the bed   M2x10mm x8 ahead RC...
Page 5 Installing and assembling the bumper   M2x10mm x4 Repeat on the other side 3mm White LED x2 3mm Red LED 3mm Orange LED x2 ahead RC...
Page 6 M2x10mm x2   ahead RC...
Page 7 Replacing and installing the rear chassis brace   Rear ahead RC...
Page 8 Installing the cab ﬂatbed spacer M2.5x15mm   ahead RC...
Page 9 Body is now fully complete. Thank you for selecting ahead RC products. If you have any questions or need help with the assembly, please do not hesitate to contact us at: aheadrc@gmail.com or visit us at: www.aheadrc.com Best of luck with your build! ahead RC...