Advertisement
Quick Links
Advertisement
Related Manuals for ahead RC TRX6
Summary of Contents for ahead RC TRX6
- Page 1 RC Crawler TGA Fuel Carrier TRX6 Assembly Manual ahead RC...
- Page 2 Required tools and hardware Tools 1.5mm Hex Driver 2.0mm Hex Driver 2.5mm Hex Driver Needle Nosed Pliers Instant Glue Hot Glue Electronics 5mm Red LED x2 5mm Orange LED x2 5mm White LE x2 Hardware Hardware Quantity Check M2*10 Socket head M2*12 Socket head M3*15 Socket head M3*20 Socket head M3*30 Socket head M3*10 Countersunk (CS) M3*15 Countersunk (CS) M4*10 Grub screw (GS) M3 Washer 12x4mm magnet (with countersunk hole) ahead RC...
- Page 3 Before you begin Be sure to read through the manual and familiarise yourself with the instructions Visualise a plan to assemble all the pieces Make sure you have all of the hardware and tools Be sure to have enough instant glue Dry fit all parts before painting and assembling Tip: It will help to paint all of the parts before final assembly ahead RC...
- Page 4 Installing the rear shock mounts Remove rear inner fenders before installing shock mounts ahead RC...
- Page 5 Assembling the fuel carrier 12x4mm magnet x4 M3x10mm CS M3x15mm Front M3x10mm CS 12x4mm magnet x2 Rear M3x15mm ahead RC...
- Page 6 Repeat on all 6 magnets 12x4mm magnet x6 M3x15mm M3x10mm CS Repeat on all 3 manhole covers Snap onto magnets ahead RC...
- Page 7 Assembling the fuel hose pipes Repeat on the other fuel M4x10mm hose pipe GS x4 M2x10mm Repeat on the other fuel hose pipe ahead RC...
- Page 8 Installing the body mounts M3x15mm Repeat on the other rear and mid mounts ahead RC...
- Page 9 M3x20mm M3x20mm M3 washer x2 Repeat on the other side To chassis M3 washer x2 M3x30mm M3x15mm x8 Repeat on the other side ahead RC...
- Page 10 Repeat on the other side M3x10mm CS Repeat on the M3x15mm other mount ahead RC...
- Page 11 Assembling the bumper M3x15 CS mm x2 5mm White LED x2 5mm Red LED x2 5mm Orange LED x2 M2x12mm ahead RC...
- Page 12 Repeat on the other rear mount M3 washer x2 M3x20mm Repeat on the other mid mount To battery tray M3 washer x2 M3x20mm ahead RC...
- Page 13 Installing the fender and mounting screw cap M3x10mm CS Repeat on all 4 caps ahead RC...
- Page 14 M2x10mm M2x10mm ahead RC...
- Page 15 Body is now fully complete. Thank you for selecting ahead RC products. If you have any questions or need help with the assembly, please do not hesitate to contact us at: aheadrc@gmail.com or visit us at: www.aheadrc.com Best of luck with your build! ahead RC...
Need help?
Do you have a question about the TRX6 and is the answer not in the manual?
Questions and answers