Advertisement
Quick Links
Advertisement
Related Manuals for ahead RC Mammoth Crawler Cat 1
Summary of Contents for ahead RC Mammoth Crawler Cat 1
- Page 1 RC Crawler Cat 1 “Mammoth” Assembly Manual ahead RC...
- Page 2 Required tools and hardware Tools 1.5mm Hex Driver 2.0mm Hex Driver 2.5mm Hex Driver Needle Nosed Pliers Instant Glue Hot Glue Electronics 5mm White LED x4 3mm Orange LED x2 Hardware Hardware Quantity Check M2*5 Socket head M2*10 Socket head M3*5 Socket head M3*10 Socket head M3*15 Socket head M3*20 Socket head M3*10 Countersunk ahead RC...
- Page 3 Before you begin Be sure to read through the manual and familiarise yourself with the instructions Visualise a plan to assemble all the pieces Make sure you have all of the hardware and tools Be sure to have enough instant glue Dry fit all parts before painting and assembling Tip: It will help to paint all of the parts before final assembly ahead RC...
- Page 4 Combining and assembling the split cab Hold in place M3x5mm ahead RC...
- Page 5 M3x10mm x14 Repeat on the other side Use M3x20mm for wide track fenders ahead RC...
- Page 6 M3x10mm x4 Install LEDs now. 2x 3mm Orange 4x 5mm White ahead RC...
- Page 7 Assembling the lower bumper M2x5mm x4 Repeat on the other side M3x20mm x4 ahead RC...
- Page 8 Assembling the dashboard M2x5mm x2 M2x10mm x1 ahead RC...
- Page 9 RC...
- Page 10 M3x5mm x4 ahead RC...
- Page 11 Mounting the side steps M3x10mm x8 Repeat on the other side ahead RC...
- Page 12 Mounting the side vent and other accessories M2x5mm x4 ahead RC...
- Page 13 Hold in place M3x15mm x1 ahead RC...
- Page 14 M3x20mm x2 Repeat on the other side ahead RC...
- Page 15 Cab side hinge x10 Repeat on the other side ahead RC...
- Page 16 Wiper assembly and mounting Repeat for the other wiper ahead RC...
- Page 17 Installing the light lenses Repeat on the other side Repeat on the other side ahead RC...
- Page 18 Assembling the roof M3x10mm Countersunk x2 Repeat for the other hinge ahead RC...
- Page 19 M3x15mm ahead RC...
- Page 20 Repeat for the other long vent M3x20mm DO NOT over tighten M3x20mm ahead RC...
- Page 21 Installing the mirrors Repeat on the other side M2x5mm x2 Repeat on the other side Repeat on the other side M2x5mm x2 ahead RC...
- Page 22 Repeat on the other side M2x5mm x2 M2x5mm x2 Repeat on the other side ahead RC...
- Page 23 Installing the doors Repeat on the other side OPTIONAL: Either hard mount with glue or use your own hinges Repeat on the other side ahead RC...
- Page 24 Body is now fully complete. Thank you for selecting ahead RC products. If you have any questions or need help with the assembly, please do not hesitate to contact us at: aheadrc@gmail.com or visit us at: www.aheadrc.com Best of luck with your build! ahead RC...
Need help?
Do you have a question about the Mammoth Crawler Cat 1 and is the answer not in the manual?
Questions and answers