Page 1
RC Crawler Baby Bog 406 Single Cab TRX4M Assembly Manual ahead RC...
Page 2
Required tools and hardware Tools 1.5mm Hex Driver 2.0mm Hex Driver Needle Nosed Pliers Instant Glue Hot Glue Electronics 3mm Orange LED x2 3mm White LED x2 Hardware Hardware Quantity Check M2*5 Socket head M2*8 Socket head M2*10 Socket head M2*12 Socket head M2*15 Socket head M2.5*20 Socket head M2.5 Washer ahead RC...
Before you begin Be sure to read through the manual and familiarise yourself with the instructions Visualise a plan to assemble all the pieces Make sure you have all of the hardware and tools Be sure to have enough instant glue Dry fit all parts before painting and assembling Tip: It will help to paint all of the parts before final assembly ahead RC...
Page 4
Assembling the cab with fenders and bumper Repeat on the other fender Repeat on M2x5mm x2 the other bumper M2x12mm mount ahead RC...
Page 8
Assembling the lights Orange 3mm LED x2 White 3mm LED x2 M2x5mm Repeat on the other side ahead RC...
Page 9
Installing the roof and snorkel M2x5mm ahead RC...
Page 10
Assembling the dashboard M2x5mm M2x15mm M2x8mm ahead RC...
Page 11
Installing the bonnet and assembling the door Repeat on the other door ahead RC...
Page 12
Installing the body mounts and assembling the wheels Repeat on other chassis mount To chassis rails M2x10mm M2.5x20mm M2.5 Washer x4 M2x8mm Repeat on all 4 wheels ahead RC...
Page 13
Replacing and installing the front and rear chassis brace Rear Use stock screws Front Use stock screws ahead RC...
Page 14
Body is now fully complete. Thank you for selecting ahead RC products. If you have any questions or need help with the assembly, please do not hesitate to contact us at: aheadrc@gmail.com or visit us at: www.aheadrc.com Best of luck with your build! ahead RC...
Need help?
Do you have a question about the TRX4M and is the answer not in the manual?
Questions and answers