PacLights FHUS Series Installation Manual

INSTALLATION GUIDE
SAFETY PRECAUTIONS
• Avoid testing this LED light with any electric generator.
• Ensure installation adheres to local, regional, and national laws and
regulations.
• Always disconnect power before installation or maintenance.
• Proper grounding is essential for safety.
• After installation, position the light to face directly downward.
DIMMING FUNCTION
• This LED light is equipped with a 0/1-10V dimming function.
• This LED highbay light offers the flexibility to be outfitted with an optional DC motion sensor.
• There are two dimming solutions available: Standard 0/1-10V dimming. Intelligent dimming when paired with the DC motion sensor.
WIRING
Verify input AC voltage before connect. Separate and cap the 0/1-10V dimming and 12v AUX wires if opt not to utilize the dimming function.
Brown/Black: ACL
no sensor
To connect an external dimmer, utilize the leads marked as dimming+ and dimming- (DC 10V). Ensure that the pink wire and the black wire encased in shrinkable
tubing remain undamaged and are not connected. Use only Class 1 Wiring for this setup. The control circuit may has a cumulative leakage current of less than 3.5mA.
MOUNTING OPTIONS
Select the installation method that best aligns with the specific product you've purchased and your requirements.
Hook Mount (standard)
Attach the hook to the fixture, ensuring it's securely tightened and fixed in
1
place, as shown in (Figure 1).
Once installed, connect the fixture's wire to the main power, adhering to
3
local wiring regulations. Ensure a stable connection and properly safe-
guard the junction.
FHUS/3
Green/Yellow
Blue/White: ACN
DIM+
DIM-
AUX+
FIG.1
Need help? (800) 988 -6386 Email: CS@PacLights.com Website: www.PacLights.com
Instructions and specifications are subject to change at any time without notice. Copyright© 2024 PacLights All Rights Reserved
LED Highbay Light
IMPORTANT
INSTALLATION NOTE
• Installation should only be performed by individuals with electrical
expertise to prevent potential electrical shock or fire hazards.
• Wear gloves during the installation to prevent injuries.
• In case of any visible smoke or sparking from the wire, immediately
disconnect the power and alert the appropriate personnel.
• When connecting the supply cord to the outlet box, use the specified
waterproof strain relief bushing for optimal protection and safety.
Green/Yellow
Brown/Black: ACL
Suspend the fixture from a ceiling hook or chain, depicted in (Figure 2).
2
Blue/White: ACN
DIM+
DIM-
AUX+
w/sensor
FIG.2
Page 1 of 3