Installing External Accessories; Charging The Battery Pack - Midland GXT67 PRO Manual

Model GXT67 Pro

INSTALLING EXTERNAL ACCESSORIES

1. Remove the accessory jack cover and set it aside for safekeeping while
using accessories.
2. Insert the accessory plug into the speaker / mic jack, making sure it is securely
in place and has made a good connection.
3. Reinstall and tighten the accessory cover when finished using accessories.
Proper tightening of the accessory jack cover is necessary for
maintaining the IP67 waterproof and dust-proof performance
of the radio.

CHARGING THE BATTERY PACK

Your GXT67 Pro radio comes with a rechargeable internal battery that can be
charged using the desktop charger or the vehicle power adapter. The desktop
charger and USB-C cable are compatible with industry-standard PD (Power
Delivery) and quick-charging USB-C AC Wall adapters.
The battery may be charged while the radio is either On or Off, but charging will
take more time with the radio On.
Using the Desktop Charger
1. Connect one USB-C cable connector to a compatible AC wall adapter.
2. Connect the other USB-C cable connector to the Desktop charger.
3. Plug the AC wall adapter into an AC power outlet.
4. Insert the radio into the Desktop Charger. The LCD backlight will turn Red to
indicate the radio is properly placed and charging.
5. Remove the radio from the charger when the LCD backlight turns GREEN,
indicating it is fully charged.
Page 7 midlandusa.com