Channel Scan - Midland GXT67 PRO Manual

Model GXT67 Pro
If the Weather Alert is not acknowledged after about 20 seconds, the radio will
automatically stop the notification tones and switch to the NWR broadcast but the
Weather icon will continue blinking rapidly to indicate there has been a Weather
Alert. Press any button to acknowledge the Alert, then use PTT or Menu / WX to
exit or change Weather modes.

CHANNEL SCAN

1. Briefly press the Scan / Monitor button to turn Scan on or off.
2. The radio will rapidly scan through the selected channels stopping
briefly on a channel in use to hear the conversation.
NOTE
: Each Channel can be configured to include in Channel Scan or to
skip when scanning.
1. Select RADIO OPTIONS from the Top Menu and press the MENU button.
2. Select SCAN SELECT in the RADIO OPTIONS menu, and press the
MENU button.
3. There are two "bulk" operations available before proceeding to per-channel
Scan / Skip selections.
• Select SCAN ALL and press MENU if you want to scan all, or most, of the
Channels. Then proceed to select SKIP for any Channels you want to
exclude from scanning.
• Select SKIP ALL and press MENU if you want to scan just a few Channels.
Then proceed to select SCAN for the Channels you want to include in
scanning. Note that Channel Scan will not be performed unless two or
more channels are selected to Scan.
4. After doing SCAN ALL or SKIP ALL operations, or after pressing MENU with
SELECT CHANNELS selected, Channel 1 is displayed with its current
selection. For each Channel, press MENU to advance to the next Channel
after selecting the SKIP or SCAN for the Channel. Press PTT to go "back" if
you do not need to advance through all the remaining Channels.
3. You may join the conversation by pressing the PTT button and using the
radio normally.
4. The radio will return to scanning after 5 seconds of inactivity.
Page 13 midlandusa.com