Midland GXT67 PRO Manual page 16

Model GXT67 Pro
SET THE RADIO TO GROUP MODE
1. Set the radio to a Channel between 1 and 22.
2. Select GROUP MODE from the Top Menu.
3. Use the Up / Down arrow to either turn Group Mode ON or OFF.
4. Press MENU to advance to the next setting, GROUP CODE.
SET A GROUP CODE
1. After selecting Group Mode On, press Menu to set the Group Code.
2. Use the Up / Down arrow button to select one of the 143 group codes
(0 – 142).
3. Press MENU again to advance to the next setting, GROUP ID.
SET A GROUP ID
1. Once the GROUP CODE is set, press menu to set the GROUP ID.
a. "ID" will be shown on the display with the Code digits flashing to
the right.
2. Use the UP / DOWN arrow to select one of the 10 Group Numbers / Group IDs.
3. Press MENU to advance to the next setting, Group Caller ID.
SET A GROUP CALLER ID
1. After the GROUP ID is set, press Menu to set your Group CALLER ID.
• CALLER ID will identify you as the caller when transmitting
a Group Call.
• CALLER ID is a 4-digit number selected by the user.
2. The first digit in the display will be flashing. Use the Up / Down arrow
button to select the first digit of your CALLER ID.
3. Press the SCAN / MON button to advance to the next digit. Use the
Up / Down arrow to make the selection.
4. Repeat step 3 until all 4 digits are set.
5. Press MENU to advance to the next setting, GROUP RING TONE.
SET A GROUP RING TONE
1. After the CALLER ID is set, press Menu to set your RING TONE.
• Your RING TONE will sound when you receive a Group Call.
2. Use the UP / DOWN arrow button to select one of the 5 Group Ring Tones.
Page 16 midlandusa.com