Midland GXT67 PRO Manual page 10

Model GXT67 Pro
CHANNEL SELECTION
1. Briefly press the Menu button, then use the Up / Down arrow buttons to select
one of the GMRS channels or Repeater channels (when enabled).
2. Press the PTT button to confirm the setting and resume normal radio operation.
DISPLAY ILLUMINATION
The display will automatically illuminate when the radio is first turned on, at the
start of a new RX or TX activity, and when buttons are pressed. The display will
automatically turn off.
KEYPAD FUNCTION
The following functions can be directly accessed through the radio keypad.
CALL ALERT
The GXT67 Pro can send a "Call Tone" (direct call) to other radios to alert them
you are about to transmit. Make sure Call Alert is turned on and a call tone is
selected using the MENU function.
1. Briefly press the CALL / LOCK button to transmit a Call Alert.
2. The TX Icon will illuminate as the Call Alert is transmitted.
KEYPAD LOCK
The Keypad can be locked to prevent accidental changes to the settings.
You can transmit / receive voice transmissions, use Call Alert, activate the SOS
Siren, and Monitor the channel while the keypad is locked.
1. Press and hold the CALL / LOCK button for 3 seconds to lock / unlock
the keypad.
MENU
See the sections below on how to access more features and configure the radio
using the Menu button.
Page 10
NOTE: Upper functions are activated by
SHORT PRESS of the button.
Lower functions are activated by PRESS
and HOLD of the button, Example:
To activate SCAN, press and release the
button momentarily.
To activate MON, press and hold the
button for 3 seconds.
midlandusa.com