Wiring Diagram - SIGNIFY Day-Brite CFI FCY Installation Manual

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
Reorient or relocate the receiving antenna.
Connect the equipment into an outlet
Consult the dealer or an experienced radio/TV technician for help.

Wiring Diagram

Supply Line
Supply Neutral
Supply Ground
© 2024 Signify Holding. All rights reserved. The information provided herein is subject to change,
without notice. Signify does not give any representation or warranty as to the accuracy or
completeness of the information included herein and shall not be liable for any action in reliance
thereon. The information presented in this document is not intended as any commercial offer and
does not form part of any quotation or contract, unless otherwise agreed by Signify.
All trademarks are owned by Signify Holding or their respective owners.
02/12/2024 page 2 www.
02/15/2024 page 2
interference in a commercial
n. If this equipment does cause harmful interference to radio
Black Wire
White Wire
Luminaire
Green/B are Wire
Violet Wire
0-10V Dim + (pos)
For dimming wires, use class 1 wiring methods.
Cap dimming wires (separately) if not used.
Cap Emergency wires (separately) if not used.
SAVE THESE INSTRUCTIONS
he following measures:
Red Wire
Emergency(+)
White Wire
Emergency(-)
Grey or Pink Wire
0-10V Dim - (neg)
s.
Signify North America Corporation
Signify North America Corporation
400 Crossing Blvd, Suite 600
400 Crossing Blvd, Suite 600
Bridgewater, NJ 08807, USA
Bridgewater, NJ 08807, USA
, and can radiate radio