Jumpers Setup - ASROCK AD425PV - V1.0 User Manual

2.5 Jumpers Setup

2.5 Jumpers Setup 2.5 Jumpers Setup 2.5 Jumpers Setup 2.5 Jumpers Setup
The illustration shows how jumpers are
setup. When the jumper cap is placed on
pins, the jumper is "Short". If no jumper cap
is placed on pins, the jumper is "Open". The
illustration shows a 3-pin jumper whose pin1
and pin2 are "Short" when jumper cap is
placed on these 2 pins.
Jumper
PS2_USB_PWR1
1_2
(see p.10 No. 1)
Note: To select +5VSB, it requires 2 Amp and higher standby current provided by
power supply.
Setting
2_3
+5V +5VSB
Description
Short pin2, pin3 to enable
+5VSB (standby) for PS/2
or USB wake up events.
1 5 1 5 1 5
1 5 1 5