Laws Pertaining To Spark Arresters; Manufacturer's Approval; Abbreviations - AEM SM60 Operator's Manual

Foreword

1.5 Laws Pertaining to Spark Arresters

1.5 Laws Pertaining to Spark Arresters
1.6

Manufacturer's Approval

1.7

Abbreviations

Term
AUX
DTC
ECU
EGR
EH
FMI
PEL
PPE
ROC
SMV
SPN
STD
10
State Health Safety Codes and Public Resources Codes specify that in cer-
tain locations spark arresters be used on internal combustion engines that
use hydrocarbon fuels. A spark arrester is a device designed to prevent acci-
dental discharge of sparks or flames from the engine exhaust. Spark ar-
resters are qualified and rated by the United States Forest Service for this
purpose. In order to comply with local laws regarding spark arresters, consult
the engine distributor or the local Health and Safety Administrator.
This manual contains references to approved parts, attachments, and modi-
fications. The following definitions apply:
• Approved parts or attachments are those either manufactured or pro-
vided by the manufacturer.
• Approved modifications are those performed by an authorized service
center according to written instructions published by the manufacturer.
• Unapproved parts, attachments, and modifications are those that do not
meet the approved criteria.
Unapproved parts, attachments, or modifications may have the following
consequences:
• Serious injury hazards to the operator and persons in the work area
• Permanent damage to the machine which will not be covered under war-
ranty
Contact your dealer immediately if you have questions about approved or
unapproved parts, attachments, or modifications.
Auxiliary
Diagnostic trouble code
Engine control unit
Exhaust gas recirculation
Electro-hydraulic
Failure mode identifier
Permissible exposure limits
Personal protective equipment
Rated operating capacity
Slow moving vehicle
Suspect parameter number
Standard (hydraulics)
Definition
Operator's Manual | SM60 | 5100069946 / 3300033350 | 06/2024 | [en-US]