Compact trough drinker 100 cm for cattle, dairy cows, horses ideal for animals with nose rings or anti-suction ring water pressure from 1 - 5 bar / 14,5 - 72,5 psi (2 pages)
Compact trough drinker 55 cm for cattle, dairy cows, calves, horses ideal for animals with nose rings or anti-suction ring water pressure from 1 - 5 bar / 14,5 - 72,5 psi (2 pages)
Page 1
Mod. 130P-H mit eingebauter Heizung with installed heating avec plaquette chauffante intégrée Best.-Nr. • Ref. 100.1305 Wasserdruck von 1 - 5 bar Water pressure from 1 - 5 bar / 14,5 - 72 psi Pression d’eau de 1 à 5 bar für Rinder, Pferde, Kälber, Schafe, Ziegen for Cattle, Horses, Calves, Sheep, Goats pour bovins, chevaux, veaux, ovins, caprins...
Page 2
Wasserdruck maximal 5 bar Wasser-Anschluss Wir empfehlen als waagrechte Zuleitung ¾” zu verwenden. Zum Anschließen der Stichleitung ½” ist die Verwendung einer SUEVIA Anbohrschelle Best.-Nr. 101.0525 vor- Einbauhöhe gesehen. Der Wasseranschluss erfolgt seitlich von rechts. Für Oben- oder Untenanschluss wird eine SUEVIA Winkelverschraubung ½” Best.-Nr. 102.0352 empfohlen. Alternativ kann das Schwimmerventil im Becken auch gedreht werden, für linksseitigen Wasseranschluss.
Page 3
Über ein integriertes Thermostat wird die Heizung bei + 5°C ein und bei + 12°C ausgeschaltet. Zur Stromversorgung ist ein SUEVIA Transformator 230/24 V erforderlich. Die Tränkebecken-Heizung ist mit einem 3 Meter langem Anschlusskabel versehen, dieses muss vor Tierverbiss geschützt montiert werden.
Page 4
Water Connection We recommend as horizontal tube the use of a ¾” pipe. It is foreseen for installation of the connecting pipe ½” the use of SUEVIA Boring Bracket Ref. 101.0525. Water connection Installation height from right laterally. For connection from the top or bottom angular screwing ½”...
5°C and off at 12°C. For power supply a SUEVIA Transformer 230/24 V is necessary. The heating element is equipped with a 3 m connection cable and mounted behind the tube valve, inaccessible for the animal! To ensure a frost-free feed pipe, a frost protection heating cable 24 V, 20 W, 2 m (Ref.
Page 6
Conseils d’installation Modèle 130P-H Montage sur mur Monter l’abreuvoir sur le mur à l’aide de fixations adaptées. Pour montage sur tubulaire prévoir une plaque de fixation en acier. Pour ôter le capot de protection, retirer la vis Réf. 102.0346. Hauteur d’installation ¾”...
Chauffage Longueurs de câble maximales: Pour l’alimentation électrique il est recommandé d’utiliser le transformateur SUEVIA pour chaque abreuvoir. Pour la section de câble électrique voir tableau Section jusque jusque jusque jusque par ex.Type NYY des longueurs de câble. Proteger le câble électrique des morsures! Pour la...
Need help?
Do you have a question about the 130-H and is the answer not in the manual?
Questions and answers