Subscribe to Our Youtube Channel
Related Manuals for Orion 84470
Summary of Contents for Orion 84470
- Page 1 SPR ING OPER ATED HOSE REEL Installation manual Part No. / Art. No. / Rèf.: 84470, 84480, 84490, 88495 Alentec & Orion AB Grustagsvägen 4, SE-13840, Älta, SWEDEN · info@alentec.se · www.alentec.com...
- Page 2 General description PREFACE The Spring Exhaust Hose Reel (SER) uses an enclosed spring Using this manual cassette to recoil the exhaust hose. An operator can pull down the hose to the desired position and pull down again to retract Pictograms and symbols the hose.
-
Page 3: Product Description
Technical specifications PRODUCT DESCRIPTION Do not change the specifications given in this manual. Product components Modifications Modification of (parts of) the product is not allowed. The product consists of the following main components and Installation elements (fig. 2.1): - The installation of this product is exclusively reserved to A Mounting beams authorised, trained and qualified engineers. -
Page 4: Installation
INSTALLATION ATTENTION Do not use long tack screws when installing the optional HR-AD. Protruding screws could prevent Tools and requirements the automatic damper from opening properly. You need the following tools and requirements to Adjusting hose stop bar install the unit: The height of the hose stop bar in the frame can be adjusted - philips screwdriver to accomodate the different hose diameters. - Page 5 Fig. 4.6 SER mounting on ceiling Heights and dimensions A = Mounting height B = Hose length Fig. 4.8 SER dimensions C = Maximum reach 84470 84480 mm (in.) mm (in.) 552 mm (21.7 in.) 552 mm (21.7 in.) 500 mm (19.7 in.) 500 mm (19.7 in.)
-
Page 6: Maintenance
Options and accessoiries 4.7.1 Micro switch MSR-24/2 For installation of the MSR-24/2, refer to MSR-24/2 manual. 4.7.2 Automatic damper When a SER with automatic damper has been ordered the damper will be preinstalled on the unit. The SER hose reel includes either one or two heavy-duty springs that are factory installed to the outside of the reel assembly. -
Page 7: Troubleshooting
Reconnect the CE declaration of conformity for machinery disconnected hose inside the drum We, Alentec & Orion AB, Grustagsvägen 4, SE-138 40 Älta, The hose does not Too much weight Adjust the spring Sweden, herewith declare, on our own responsibility, that... - Page 8 NOTES 0000302682/120522/0 SER...
- Page 9 NOTES 0000302682/120522/0 SER...
- Page 10 Alentec & Orion AB Grustagsvägen 4, SE-13840, Älta, SWEDEN · info@alentec.se · www.alentec.com...
Need help?
Do you have a question about the 84470 and is the answer not in the manual?
Questions and answers