Page 2
• To assure the function of the hose reel, it is important to choose a • För att säkerställa slangrullens funktion är det mycket viktigt att använ- Alentec & Orion AB Grustagsvägen 4, SE-13840, Älta, SWEDEN · info@alentec.se · www.alentec.com...
Replace the plastic covers in the new Sätt i plastpluggarna i hålen där fästet tidigare var monterat (Fig. 5). grooves which are now free (Fig. 5). FIG 5. Alentec & Orion AB Grustagsvägen 4, SE-13840, Älta, SWEDEN · info@alentec.se · www.alentec.com...
If the hose reel does not rewind satisfactorily, then adjust the tension spänning”. of the power spring (see “Spring load adjustment”) FIG 6. FIG 7. FIG 8a. FIG 8b. FIG 9. Alentec & Orion AB Grustagsvägen 4, SE-13840, Älta, SWEDEN · info@alentec.se · www.alentec.com...
Page 5
Dra försiktigt ut slangen tills spärren släpper och låt slangen rullas tillbaka på rullen (Fig. 14). Upprepa om mindre spänning önskas. FIG 11. FIG 12. FIG 13. FIG 14. Alentec & Orion AB Grustagsvägen 4, SE-13840, Älta, SWEDEN · info@alentec.se · www.alentec.com...
Page 6
Minska fjäderns förspänning Skadad spärr Byt ut spärr Reel doesn't latch Spärr felaktigt monterad Kontrollera att spärren är korrekt monterad Skadad fjäder till spärr Byt ut spärr Alentec & Orion AB Grustagsvägen 4, SE-13840, Älta, SWEDEN · info@alentec.se · www.alentec.com...
Page 7
GENERAL / ALLMÄNT / GÉNÉRALITÉS SPARE PARTS / RESERVDELAR Alentec & Orion AB Grustagsvägen 4, SE-13840, Älta, SWEDEN · info@alentec.se · www.alentec.com...
Page 10
EC CONFORMITY DECLARATION / KONFORMITETSDEKLARATION Alentec&Orion AB, Grustagsvägen 4, SE-13840, Älta, Sweden, declares by the present certificate that the mentioned machinery is in conformity with the following standards or other normative documents (TÜV S9211282), (DIN 24558 / 10.91), (DIN EN 292 / 2/11.91) and has been declared in conformity with the EC Directive (2006/42/EEC).