Page 3
AUTOOL. The information contained herein is designed only for the use of this unit. AUTOOL is not responsible for any use of this information as applied to other units. ●...
SPECIFICATION Rated operating voltage 4.5V (3XAAA batteries) Operating current <30mA Standby power consumption <500uA 0.96-inch TFT-LCD with Display screen specifications backlight, resolution of 80 RGB*160 dots Buttons Toggle button, Enter button Casing material PA6-GF45 Silicone gel Button material Applicable measurement diameter <40mm Stainless steel and copper Hardware parts material...
Page 6
Live temperature waveform mode ● Display the temperature/time curve in a coordinate system, showing the real-time variation of temperature over time. Each set of data spans 150 seconds, and a total of 8 sets of waveform data can be stored. It also allows browsing of historical waveforms. Record_1 Record_2 Record_3...
Enter button Display Description Long-press the Enter button for 2s to power on. Upon powering on, ● the screen will display “AUTOOL” and automatically navigate to the main interface. You can switch between three functional icons by pressing the Toggle button.
Page 8
Test Wave Setup Test Wave Setup When the cursor is positioned under the “Test” icon, pressing the ● ● Enter button will enter the live numerical display page. In this display, pressing the Toggle button will return to the main interface. 29.9 °C Test...
Page 9
Among this, the horizontal axis represents time in seconds, and the vertical axis represents temperature in degrees Celsius (°C) or degrees Fahrenheit (°F), automatically switching based on user settings. As time progresses, a temperature/time curve will be displayed on the screen. Pressing the Enter button will pause the real-time waveform recording, and pressing the Enter button again will resume real-time waveform recording.
Page 10
Setup Settings ● When the cursor is positioned under the “Setup” icon, pressing the Enter button to system settings interface. From there, you can configure settings such as temperature units, backlight brightness, system language, and other options. Test Wave Setup Unit Brigh Lang...
Page 11
Language ● In the SETUP settings page, when the cursor is positioned under the Language icon, pressing the Enter button to language settings. 中文 Unit Brigh Lang Use the Toggle button to switch between different languages, and press the Enter button to select and save the language. Once the setting is completed, the display will automatically return to the main interface.
MAINTENANCE SERVICE ● Our products are made of long-lasting and durable materials, and we insist on perfect production process. Each product leaves the factory after 35 procedures and 12 times of testing and inspection work, which ensures that each product has excellent quality and performance. Maintenance To maintain the performance and appearance of the product, it is recom- mended that the following product care guidelines be read carefully:...
The product breakdown because the user does not follow product ● instructions to use or maintain the product. We AUTOOL pride ourselves on superb design and excellent service. It would be our pleasure to provide you with any further support or services. Disclaimer ●...
RETURN & EXCHANGE SERVICE ● If you are an AUTOOL user and are not satisfied with the AUTOOL products purchased from the online authorized shopping platform and offline authorized dealers, you can return the products within seven days from the date of receipt; or you may exchange it for another product of the same value within 30 days from the date of delivery.
Need help?
Do you have a question about the LM55 and is the answer not in the manual?
Questions and answers