Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for VTOMAN X1
Summary of Contents for VTOMAN X1
- Page 1 Product: X1 Model: JS-211...
- Page 4 DC 15V/10A Output...
-
Page 5: Key Points
Key Points More Than A Jump Starter: The X1 jump starter is derived from the upgraded design of 2024 which will lead the market trend in the future. This battery jump starter integrates six functions such as car emergency start, tire inflator, lighting, SOS warning, charging for mobile devices, and... - Page 6 Upgraded Thermal Design: Jump box and air compressor unique honeycomb heat dissipation design enables the X1 jump starter to obtain more powerful heat dissipation performance, so the safety performance of the X1 car jump starter is Enhanced by 30%, and its service life is promoted by 50%.
- Page 7 Safety Is The First Priority: The unique design of the X1 car battery booster makes it easy and fast to start your car in extreme environments (-4°F to 140°F), with built-in 10 safety protection technologies (over-charge, over-current, short-circuit, reverse-polarity, low-temp, high-temp, over-voltage, over-load, spark-proof, reverse-charge).
- Page 8 How to Start a 12V Vehicle (Make sure the battery power>2 bars) Note: Do not press the "BOOST" button on the jumper cable before connecting the vehicle battery correctly. 1. Insert the blue end of the battery clip into the hose machine while making sure that the indicator on the clip is off.
- Page 9 Solid red light: This indicates that the positive and negative terminals are incor- rectly connected. Please reconnect them correctly, and once the green light turns solid, proceed with the emergency jump-start. Flashing green light: This indicates that the battery voltage is too low. Press the BOOST button, and once the green light turns solid, complete the jump-start within 30 seconds.
- Page 10 After selecting the inflating mode, the inflation function can be turned on by short pressing the power switch key once.
- Page 11 How to Turn On/Off the LED Flashlight Simply press the button once to turn on the LED light function, each time you press the button to switch the light mode, there are three light modes for you to choose. (Normal, Strobe, SOS) How to Turn this unit on and off Press and hold the power button for two seconds to turn on the device, and press and hold the power button again for two seconds to turn off the device.
- Page 13 Q1: What is the operating temperature of this unit and how to store it? A: This unit is lithium polymer battery, operating temp is -20-60 °C/ -4-140°F. If the ambient temperature is higher than 60°C/140°F, the internal construction of the battery cells may be damaged, it may swell and become unsafe.
- Page 17 13. Do not start the product for more than three consecutive times, as this may cause it to overheat and damage the product. If you need to start the product multiple times, please make sure to wait for two minutes between each start-up.
Need help?
Do you have a question about the X1 and is the answer not in the manual?
Questions and answers