Advertisement
To ensure a good user experience, personal safety, and property security, please read all of the instructions carefully before using this product, please keep this manual for reference.
Charge It First!
While reading through the manual, you can start to charge your V4000 with the wall charger and type-c cable provided.
This unit is for vehicle (equipment) with 12V batteries. It may be dangerous if it is used with other types of batteries. Read and understand the safety information before using the jump starter. Failure to follow the safety information may cause damage to the jump starter, and may also result in electric shock, explosions, fire, property damage, and personal injury.
Battery Indicator:
Press the power button to check the battery power:
The indicator will blink one by one during the period of charging. Different numbers of solid indicators show different battery power. All indicators will be turned off automatically when the charging process was finished.
This unit can be charged with the Type-c cable and the wall charger we provided. (Only via the QC3.0 wall charger or QC3.0 car charger can achieve the 18W max input function, QC3.0 car charger need to be purchased separately. )
(Make sure the battery power>2 bars)
Note: Do not press the "BOOST" button before connecting the vehicle battery correctly.
Check the LED indicator in the front of this product and follow the instructions as below:
LED Indicator | Operation |
Green LED (solid) | The connection is correct, you can start the vehicle directly. |
Red LED+Beeping | Reverse connection, please correct the polarity of battery clamps. |
Green LED (blinks) with beeping | The vehicle battery voltage is too low, try to press "BOOST" button 2-3s, when Green LED illuminates (solid), then start the vehicle within 30s. |
NO Light, NO Beeping | The vehicle battery may be damaged, first of all, make sure the correct connection, try to press "BOOST" button 2-3s, when Green LED illuminates (solid), then start the vehicle within 30s. |
Green+Red LED (blinks) | Non-stop starts vehicles more than 4 times within 10 mins, entering safe mode. Stop starting your vehicle, safe mode will disappear after 10 mins. |
If any problem persists, stop using the jump starter and contact our service team directly at support@vtoman.com, we will do our best to solve the problem within 24 hours.
Power on, then press power button for 2-3s to turn on the LED light. There are 3 modes of LED light (Normal, Strobe, SOS, Off) if you press lightly.
This unit will be turned off automatically in IOS when it's not used (no load).
Composition and amount of toxic or harmful substance in this product
0: Indicate that the content of harmful substances in all homogeneous materials is all lower than the prescribed limit of MCV (the standard 2002/95/EC/RoHs)
![]() | Part Name | Quantity |
1 | Host with battery clamps | 1 |
2 | Carrying Bag | 1 |
3 | USB-A to USB-C Cable | 1 |
4 | Quick Charge Wall Charger | 1 |
5 | User Manual | 1 |
Capacity | 99.2Wh | |
Starting Current | 800A (3s) | |
Peak Current | 4000A | |
USB-C In | 5V/2A, 9V/2A | |
USB Out | 5V/2.4A | |
Operating Temp | -20º C ![]() ![]() | |
Life time | > 1000 cycles | |
Full Charge Time | 6-8 hours (QC3.0 charger) |
Q1: What is the operating temperature of this unit and how to store it?
A: This unit is lithium polymer battery, operating temp is -20-60 oc/ -4-1400 F. If the ambient temperature is higher than 600C/1400 F, the internal construction of the battery cells may be damaged, it may swell and become unsafe. So don't store the device in vehicle which parked in hot weather for long periods of time.
A: Please refer to the instructions about "How to Start a 12V Vehicle'
Q3: How do you know if this unit is connected to the vehicle correctly?
A: With the battery clamps connected to the vehicle battery, if the intelligent indicator in the front of this product shines a steady green light, it means clamps connected correctly, while if the intelligent indicator illuminates red light with beeping, which means it's connected reversely.
A: Recharge this unit fully, and try to press the "BOOST" button 2-3s after connecting the vehicle battery correctly, the intelligent indicator illuminates steady green light, then start the vehicle within 30s. If it still does not work, contact us at: support@vtoman.com ( Attach your order ID).
A: Charge it with a usb-c cable and wall charger for a full overnight period. If it still does not work, contact us at: support@vtoman.com ( Attach your order ID).
Q6: What should I do if this unit can't charge other devices?
A: Try to charge the device with another charging cable, If it works, which means the charging cable we provided is defective, we will provide you a new one; If it still does not work, please email us at: support@vtoman.com ( Attach your order ID).
Q7: Can this unit charge other devices while it is being charged?
A: Yes.
Q8: Can this product charge other devices while starting a vehicle?
A: No.
A: It would be best to recharge it every 3 months.
Q10: Why it shuts off in IOS when charging other devices?
A. This unit may shut off automatically when charging for the devices that need light charging current, such as headphone, smart watch, etc since there is minimum load current limitation (200mA) on this unit, it will be automatically off after IOS if the load current is less than 200mA.
Attention
![]() | Do Not Submerge In Water |
![]() | Do Not Disassemble |
![]() | Do Not Drop |
![]() | Avoid Extreme Temperatures |
![]() | Do Not Place Near or Into Fire |
Customer Service
![]() | 18 Months Limited Warranty Service |
![]() | Lifetime Technical Service |
![]() | Feel Free to Contact Us Support@vtoman.com |
![]() | For FAQ and More Information Support@vtoman.com |
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download VTOMAN V4000 - Jump Starter with Air Compressor Manual
Advertisement
Need help?
Do you have a question about the V4000 and is the answer not in the manual?
Questions and answers