EMG GZR P-HZ Installation Information

INSTALLATION INFORMATION
EMG MODELS: P-HZ (GZR MODEL)
SPECIFICATIONS
Logo Color
Magnet Type
Inductance (Henries)
DC Resistance (kOhm)
Resonant Frequency (KHz) (1)
Resonant Frequency (KHz) (2)
Impedance at Resonance (kOhm) (1)
(1) Loaded with 250K Volume and Tone
and 20' (6M) 560pf cable
(2) Loaded with 1 MegOhm / 47pf
Installation notes:
As you can see in the diagram above, the GZR P-HZ consists of two pickups. Both pickups are identical in size and shape. The pickup that
features the EMG Logo is intended to be used under the D/G Strings so that the connector cable is long enough to get to the control cavity.
All EMG-HZ Pickups are compatible with each other. The connector system is an easy method of installation, avoiding the need to solder.
EMG Accessory Circuits like the VLPF, EXB, BTC or BQC Controls can be added to any EMG Pickup System. All have buffered inputs and can
be used on either passive or active pickups. Adding Active accessories will require a battery.
IMPORTANT NOTE: String Ground (Earth)
It is common practice to use a bridge ground wire to reduce noise in instruments with passive pickups. An IDC connector is included that will
attach your bridge ground wire to the included "Ground Buss" so all ground wires can be connected together.
Included with each pickup:
1 VOLUME CONTROL (250K)
1 TONE CONTROL (250K)
.235 (6)
.390
.310 (8)
(10)
MONO OUTPUT
JACK
Warranty
All EMG Pickups and accessories are warranted for a period of two years. This warranty does not cover failure due to improper installation, abuse or damage. If
upon examination the pickup is determined to be defective, a replacement will be made. Warranty replacement products are covered by this same warranty. This
warranty covers only those pickups and accessories sold by authorized EMG Dealers. This warranty is not transferable.
© 2024 Copyright EMG INC. All Rights Reserved.
1.100 1.100
(27.94) (27.94)
MODEL:
GZR P-HZ
Gold
Alnico 5
6.12
11.20
1.77
2.36
68.00
ADJUSTMENT SCREWS (4)
GROUND
BUSS
BRIDGE GROUND
CONNECTOR
2.250 2.250
2.450 2.450
(62.23) (62.23)
#4 PHILLIPS RH WOOD SCREWS
FOR MOUNTING
LOGO SIDE FOR
D AND G STRINGS
P-HZ PICKUP CABLES 13.5" (34cm) / 6" (15cm)
2 CONNECT CABLES 5.5" (14cm)
OUTPUT CABLE 6" (15cm)
GROUND WIRES 6" (15cm)
R .125 R .125
(3.17) TYP (3.17) TYP
R .234 R .234
(5.94) TYP (5.94) TYP