Advertisement
Advertisement
Table of Contents
Related Manuals for Ross VEA-7007
Summary of Contents for Ross VEA-7007
- Page 1 VEA-7007 Video/AES Equalizing Amp User Manual 7007-VEA-01-MNL Issue: 1...
- Page 2 The material in this guide is furnished for informational use only. It is subject to change without notice and should not be construed as commitment by Ross Video Limited. Ross Video Limited assumes no responsibility or liability for errors or inaccuracies that may appear in this manual.
- Page 3 The VEA-7007 provides remarkable value and excellent performance in a basic equalizing amplifier for video and AES audio. The VEA-7007 is an economical equalizing amplifier well suited to analog video or AES audio distribution where the source signal is of good quality and does not require clamping correction.
-
Page 4: Operation
VEA-7007 Video/AES Equalizing Amplifier Operation The only user-operated controls are GAIN and EQUALIZATION. These are set as required for the situation and cable length. Use any suitable test signal, which would enable the signal gain and subcarrier level to be correctly set. (e.g. pulse & bar or color bar). A sweep signal can be used, but is not normally necessary. - Page 5 VEA-7007 Video/AES Equalizing Amplifier Alignment IMPORTANT: All Ross distribution amplifiers have been very accurately calibrated at the factory. Alignment should only be attempted if absolutely necessary and the required precision sweep measuring equipment is available. 1. TEST SETUP Put the amplifier on the extender board and turn power on.
-
Page 6: Specifications
Universal Power Supply 85-250V EXT-7200 Extender Board Note: All Ross Video Limited terminal equipment frames include one power supply. A redundant power supply may be installed in all two-rack unit frames if required. One Owner's manual is supplied with each frame. †... - Page 7 VEA-7007 Video/AES Equalizing Amplifier VEA-7007 VIDEO EQUALIZING AMP. Revised: August 5, 1998 7007A-001 Revision: 01 Bill Of Materials August 5, 1998 18:21:12 Page Item Quantity Reference Part DESCRIPTION PART NUMBER ___________________________________________________________________________________________________________ CON\30P\156\E NOT A BOUGHT PART ------- C1,C10,C28,C30,C31 NO VALUE,CAP,DCAP\SR21...
-
Page 10: In Case Of Problems
RossGear product. Ross Video Limited reserves the right to assess any modifications or repairs made by you and decide whether they fall within warranty limitations, should you decide to return your RossGear product for repair.
Need help?
Do you have a question about the VEA-7007 and is the answer not in the manual?
Questions and answers