Hydroclean System 17+18 - NEFF B1451B2GB How To Connect

Hydroclean system:
The hydroclean system featured in your
oven is intended to help you keep your
oven neat and tidy. An amount of cleaning
solution is vaporised automatically. The
combined effects of heat and steam soften
the grease deposits on the oven wall
enamel and facilitate their removal.
Caution:
Use this function only after the oven has
completely cooled (room temperature).
Use normal water only, and not distilled
water.
Activate hydroclean:
1. Remove the roasting pan from the oven.
The wire shelf may remain in the oven.
2. Pour approx. 400 ml (
mixed with a little washing up liquid into
the floor pan of the oven cavity.
In the case of heavy soil build-up, you
may wish to allow the cleaning solution
to soak in for a while before you activate
the cleaning function.
3. Close the oven door.
4. Turn the function selector to the
position. Both the oven cleaning and
oven temperature control lamps will
light. After the heating time has passed
(4 minutes), the oven temperature
control lamp extinguishes. After another
17 minutes, the end of the cleaning
cycle is indicated by an audible signal.
Deactivate oven cleaning function:
Turn the function selector to the 0 position.
The oven cleaning control lamp
extinguishes.
Cleaning and Care
x
/ pint) of water
3
4
x
Function selector
Control lamp
Hydroclean system
Temperature selector
with control lamp
17