Removing/Installing The Oven Door; Oven Light; Removing Shelf Railings; Heating Element - NEFF B1451B2GB How To Connect

How to connect up, build-in, set up, use and look after
Table of Contents

Advertisement

Manual cleaning steps:
Note: To make cleaning more convenient,
the oven offers you the following options:
Removing the oven door:
1. Fully open the oven door.
2. Move the catch levers on the right and
left-hand sides to the fully open position.
3. Placing the door at an upward angle
toward you, grasp the door with both
hands and lift it out of the hinges toward
you.
Replacing the oven door:
1. Set both hinges into their respective
receptacles on the left and right, and
swing the oven door downward.
2. Close the catch levers on the left and
right.
3. Close the oven door.
Switch on the oven light:
Turn the function selector to the
a
position.
Removing the shelf railings:
1. On both left and right sides, remove the
one milled screws.
2. Carefully remove the suspended grids.
Lowering the heating element:
Caution: The heating element must have
been allowed to cool.
1. Unlock the heating element by turning
the ratchet at the ceiling of the oven
cavity.
Caution: in the lowered position, never
switch on the heating element or place
any weight on it.
2. After cleaning, swing the heating
element upwards, and latch it into place.
Cleaning and Care
2.
1.
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

B1451s2gbB1451w2gbB1451

Table of Contents