Hydroclean System 24+25 - NEFF B1641S2GB How To Connect

Hydroclean system:
The hydroclean system featured in your
oven is intended to help you keep your oven
neat and tidy. An amount of cleaning
solution is vaporised automatically. The
combined effects of heat and steam soften
the grease deposits on the oven wall
enamel and facilitate their removal.
Caution:
Use this function only after the oven has
completely cooled (Room temperature).
Use normal water only, and no distilled
water.
Activate hydroclean:
1. Remove the roasting pan from the oven.
The wire shelf may remain in the oven.
2. Pour approx. 400 ml (
mixed with a little washing up liquid into
the floor pan of the oven cavity.
In the case of heavy soil build-up, you
may wish to allow the cleaning solution
to soak in for a while before you activate
the cleaning function.
3. Close the oven door.
CAUTION:
The hydroclean system can only be
switched ON when the oven has
cooled down completely.
4. Turn the function selector to position
The indicator light and the
x
indicator light for oven temperature
illuminate.
is displayed.
*
If flashes, the oven has not
*
cooled down completely.
After the initial heating time (approx.
4 minutes) the oven temperature
control lamp extinguishes. After a
further 17 minutes the program cycle
is completed. A buzzer sounds.
Switching OFF:
Turn the function selector to the
The oven cleaning control lamp
extinguishes.
24
Cleaning and Care
x
3 / pint) of water
4
x
C
position.
{
.
Function selector