Connecting Peripheral Devices - Omron Z550 Setup Manual

Connecting Peripheral Devices

This section shows how to connect peripheral devices to the Controller.
Always turn OFF the power supply before connecting or disconnecting a peripheral device's cable. The peripheral device
may be damaged if it is connected while the power is ON.
The various connectors on the Controller are capped when the Controller is shipped.
When a connector is not being used, leave the cap in place or replace the cap to protect against dust, dirt, and static
electricity.
Connecting a Console
Connect the console Z300-KP to the Controller's console connector.
CONSOLE
Connecting a Monitor
Connect the monitor cable F150-VM to the Controller's monitor connector.
MONITOR
SECTION 1
Wiring and Connection
ESC TRIG ENT
SHIFT
CONSOLE
POWER
SYNC
Setup Manual
Z550
21