Features Of The Face Plate Auto-Builder For Ns - Omron WS02-NSFC1-EV3 - 12-2007 Operation Manual

Features of the Face Plate Auto-Builder for NS

1-1 Features of the Face Plate Auto-Builder for NS
1-1-1 Features
2
The Face Plate Auto-Builder for NS is a software package that automatically
builds project files for NS-series Programmable Terminals that are used for
monitoring and tuning CS1W-LC001 Loop Control Units, CS1W-LCB01,
CS1W-LCB05 Loop Control Boards, CS1D-CPU@@P Process-control CPU
Units, and CJ1W-CPU@@P Loop Control CPU Units.
Based on a CSV tag file created using the CX-Process Tool, the software
automatically builds a NS-series project file configured with Face Plate
Screens for the Loop Control Unit/Board and Process-control CPU Units.
• By simply specifying the tag file created using the CX-Process Tool, the
software automatically builds a project file for an OMRON NS-series Pro-
grammable Terminal. The project file is configured with Face Plate
Screens of the Loop Control Unit/Board and Process-control CPU Units.
• When using a Loop Control Unit/Board and Process-control CPU Unit
containing NS system version 4 or later, up to 100 loops of function block
(e.g., PID Control) monitoring and tuning can be performed on an NS-
series Programmable Terminal. With any other NS system version, up to
32 loops of function block monitoring and tuning can be performed.
• Face Plate Screens can be built for the following function blocks of Loop
Control Unit or Board.
2-position ON/OFF (Block Model 001)
3-position ON/OFF (Block Model 002)
Basic PID (Block Model 011)
Advanced PID (Block Model 012)
Indication and Operation (Block Model 032)
Indicator (Block Model 034)
Segment Program 2 (Block Model 157)
Segment Program 3 (Block Model 158)
Indication and Setting (Block Model 031)
Ratio Setting (Block Model 033)
High/Low Alarm (Block Model 111)
Timer (Block Model 205)
Counter (Block Model 208)
ON/OFF Valve Manipulator (Block Model 221)
Motor Manipulator (Block Model 222)
Reversible Motor Manipulator (Block Model 223)
Motor Opening Manipulator (Block Model 224)
Blended PID (Block Model 013)
Batch Flowrate Capture (Block Model 014)
Section 1-1