Face Plates - Omron WS02-NSFC1-EV3 - 12-2007 Operation Manual

Counter (Block Model 208)

6-12-1 Face Plates

84
The Counter counts ON/OFF transitions of a contact input and indicates when
the count exceeds the preset count SV. A prediction SV can be set for early
notification.
10
7
8
1: Status Display
The Counter face plate does not provide a status display.
2: Y1 Value Display
A Numeral Display and Input object is used to display the value of tag ITEM
Y1 (ITEM 009).
A Control Flag is set to disable input.
3: SP Numerical Value Display and Input
A Numeral Display and Input object is used to display the value of tag ITEM
SP (ITEM 007). Touch this field to display a ten-key pad below it.
Data is written to the write address of tag ITEM SP (ITEM 007) using the
Before Writing Numeral/String macro.
$W2047=GETNUMVAL();
WRITECMEM([SP_W],$W2047,1);
RETURN(1);
The upper and lower limits are 0 to 9,999.
4: PRS Numerical Value Display and Input
A Numeral Display and Input object is used to display the value of tag ITEM
PRS (ITEM 008). Touch this field to display a ten-key pad below it.
Data is written to the write address of tag ITEM PRS (ITEM 008) using the
Before Writing Numeral/String macro.
1
2
3
4
5
6
9
Section 6-12