Omron WS02-NSFC1-EV3 - 12-2007 Operation Manual page 71

Indication and Operation (Block Model 032)
56
1
2
3
1: Status Display
Either AUTO or MAN is displayed. CAS (Remote and Auto) mode is not sup-
ported, which is different from Basic PID.
The status character string displayed is determined by the value of tag ITEM
A/M_SW. (R/L_SW is not referenced, which is different from Basic PID.)
Display
MAN 0
AUTO 1
This field is created as an ON/OFF Button using a Select Shape of type 2 and
switches to display AUTO/MAN characters. Control Flag input is disabled.
2: Alarm Status Display
Indication and Setting does not provide a deviation alarm, so there is no dis-
play.
3: Auto Input
The fixed characters "X1" are displayed as a Text object. The numeral display
field is display-only. (A Control Flag is set to disable input.)
The numeral display for X1 uses an engineering unit.
4: Switch to AUTO Button
This button switches operation to Auto mode and is displayed in red during
Auto mode.
The button is created as a momentary ON/OFF Button using a Simple Rect-
angle (Type 2), and the display color is determined according to the following
table.
5
4
The actual graphic display is shown below.
A/M_SW (ITEM 086)
Section 6-5