modway EEI-1805 Manual

Barstool

Download this manual

EEI-1805 BARSTOOL

Thank you for purchasing the MODWAY BARSTOOL .

Before you start, here is some helpful advice:

1.We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step

instructions.

2.Owing to the size and weight of the barstool, we recommend that it is assembled by two adults, on a carpeted or

padded area, in the room that it is intended for. Approximate assembly time: 20minutes.

3.Please do not use any tools other than those provided or recommended in these instructions.

4.Please do not throw away any of the packaging or the instruction until you have checked all the components

and hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe

and environmentally friendly way.

5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the

components from time to time, so please save the tools that have been provided.

6.Please keep all fitting out of reach of children.

Component:

Seat x1

Customer Service 908-368-1025︱www.modwayfurniture.com

Base x1

Hardware:

Bolt M6x20mm

x 4

Allen Wrench

x 1

Page 1 of 2

Need help?

Do you have a question about the EEI-1805 and is the answer not in the manual?

Page 1 EEI-1805 BARSTOOL Thank you for purchasing the MODWAY BARSTOOL . Before you start, here is some helpful advice: 1.We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions. 2.Owing to the size and weight of the barstool, we recommend that it is assembled by two adults, on a carpeted or padded area, in the room that it is intended for.
Page 2 EEI-1805 BARSTOOL STEP 1: Please put Seat (1) on a carpeted or padded surface. Attach Base (2) to the Seat (1) by using 4 pieces of Bolts (A) as shown. Tighten Bolts (A) by using Allen Wrench (B) as shown.