Omron WS02-CXPC1-V9 - V9 Operation Manual page 36

Introducing the Function Blocks
Main Submenu
menu
Tools Simulation
Main Pop-up Menus
Pop-up Menu for Function Block Definitions
Pop-up menu
Insert Function Block Ladder
Structured Text
From file
Pop-up Menu for Inserted Function Blocks
Pop-up menu
Open
Save Function Block File
Compile
FB online Edit Begin
Send Change
Cancel
Transfer FB Source
Release FB Online
Edit Access Rights
10
Shortcut
Break Point | ---
Set/Clear
Break Point
Break Point | ---
Clear All Break
Point
Mode | Run ---
(Monitor Mode)
Mode | Stop ---
(Program
Mode)
Mode | Pause ---
Step Run ---
Step Run | ---
Step In
Step Run | ---
Step Out
Step Run | ---
Continuous
Step Run
Step Run | ---
Scan Run
Always Display ---
Current Execu-
tion Point
Break Point List ---
Creates a function block definition with a ladder programming language algo-
rithm.
Creates a function block definition with an ST language algorithm.
Reads a function block definition from a function block library file (*.cxf).
Displays the contents of the selected function block definition on the right side
of the window.
Saves the selected function block definition in a file.
Compiles the selected function block definition.
Starts online editing of a function block.
Transfers changes made during online editing of a function block.
Cancels changes made to a function block being edited online.
Transfers only the function block source.
Forcefully releases the access rights for function block online editing held by
another user.
Function
Sets or clears a break point.
Clears all break points.
Executes continuous scanning. (Sets the ladder execution
engine's run mode to MONITOR mode.)
Sets the simulator's operation mode to PROGRAM mode.
Pauses simulator operation.
Executes just one step of the simulator's program.
When there is a function block call instruction, this com-
mand moves to execution of the internal program step.
When a function block's internal program step is being exe-
cuted, this command returns to the next higher level (call
source) and pauses execution.
Executes steps continuously for a fixed length of time.
Executes for one cycle and pauses execution.
Used with the Step Run or Continuous Step Run com-
mands to automatically scroll the display and always show
the pause point.
Displays a list of the break points that have been set.
(Operation can be jumped to a specified point.)
Function
Function
Section 1-1