Cx-Programmer Specifications - Omron WS02-CXPC1-V9 - V9 Operation Manual

CX-Programmer Specifications

4-2 CX-Programmer Specifications
4-2-1 PLC Models Compatible with ST Programs (ST Tasks)
4-2-2 Specifications
•
One-dimensional array variables are supported for easier data handling in
applications.
This section describes the operating environment for CX-Programmer ST pro-
grams (ST tasks). For details on the basic CX-Programmer operating environ-
ment, refer to the CX-Programmer Operation Manual (W446).
• For details on the CX-Programmer operating environment used with other
programs (function block or SFC), refer to Part 1: Function Blocks in this
manual, or the CX-Programmer Operation Manual: SFC (W469).
The following PLC models support ST tasks.
PLC model
CJ2H
CS1G-H with unit version 4.0 CS1G-CPU45H/44H/43H/42H
CS1H-H with unit version 4.0 CS1H-CPU67H/66H/65H/64H/63H
CJ1G-H with unit version 4.0 CJ1G-CPU45H/44H/43H/42H
CJ1H-H with unit version 4.0 CJ1H-CPU67H/66H/65H/67H-R/66H-R/65H-R/64H-R
CJ1M with unit version 4.0
Item
Program languages that can
be allocated to tasks
ST program units
Tasks to which ST programs
can be allocated
Online editing
Array variables
CPU Unit model
CJ2H-CPU68/67/66/65/64/68-EIP/67-EIP/66-EIP
/65-EIP/64-EIP
CJ1M-CPU23/22/21/13/12/11
Specification
SFC, ladder, or ST (These programs can be combined
freely.)
Task units
Up to 288 tasks (32 cyclic tasks, and 256 extra cyclic
tasks)
Cyclic tasks and extra cyclic tasks
ST chart editing
Note The user can select standard mode (ST source
code included in transfer) or quick mode (ST
source code not included in transfer).
Array variables can be used in SFC, ladder, and ST
programs.
Section 4-2
133