Subscribe to Our Youtube Channel
Related Manuals for ASRock Industrial IMB-1007J
Summary of Contents for ASRock Industrial IMB-1007J
- Page 1 IMB-1007J User Manual Version 1.2 Updated March 11, 2024 Copyright©2024 ASRockInd INC. All rights reserved.
- Page 2 Version 1.0 Published December, 2023 Copyright©2024 ASRockInd INC. All rights reserved. Copyright Notice: No part of this documentation may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRockInd Inc.
- Page 3 WARNING THIS PRODUCT CONTAINS A BUTTON BATTERY If swallowed, a button battery can cause serious injury or death. Please keep batteries out of sight or reach of children. CALIFORNIA, USA ONLY The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate Best Management Practices (BMP) regulations passed by the California Legislature.
-
Page 4: Table Of Contents
Contents Chapter 1 Introduction Package Contents Specifications Motherboard Layout I/O Panel Block Diagram Chapter 2 Installation Screw Holes Pre-installation Precautions Installation of Memory Modules Expansion Slots Jumpers Setup Onboard Headers and Connectors Chapter 3 UEFI SETUP UTILITY Introduction 3.1.1 Entering BIOS Setup 3.1.2 UEFI Menu Bar 3.1.3... - Page 5 3.3.3 Storage Configuration 3.3.4 Super IO Configuration 3.3.5 ACPI Configuration 3.3.6 USB Configuration 3.3.7 Trusted Computing Hardware Health Event Monitoring Screen Security Screen Boot Screen Exit Screen...
-
Page 6: Chapter 1 Introduction
If you require technical support related to this motherboard, please visit our website for specific information about the model you are using. https://www.asrockind.com/technical-support 1.1 Package Contents ASRockInd IMB-1007J Motherboard (Mini-ITX (6.7-in x 6.7-in x 1.6-in, 17.0 cm x 17.0 cm x 4.0 cm)) -
Page 7: Specifications
Mini-ITX (6.7-in x 6.7-in x 1.6-in, 17.0 cm x 17.0 cm x 4.0 Form Factor Dimensions Intel® Alder Lake-N Processors Processor IMB-1007J (N97, QC, Max Speed Up to 3.6GHz, 12W) System BIOS AMI SPI 256 Mbit Technology Single Channel DDR5 4800 MHz... - Page 8 IMB-1007J 1 x M.2 (Key M, 2242/2280) with PCIe Gen3 x1 or Storage SATA3 for SSD SATA 1 x SATA3 (6Gb/s) Watchdog Output From Super I/O to drag RESETCON# Timer Interval 256 Segments, 0, 1, 2, ...255 Sec Input PWR...
-
Page 9: Motherboard Layout
BIOS CPU_FAN1 ESPI1 Bottom: Top: LVDS1 SMBUS_TEST1 Mic In Line Out SPDIF1 PNL_PWR1 Industrial BUZZ1 BAT1 SPEAKER1 HD_AUDIO1 BUZZ2 PLED PW BTN JGPIO1 BLT_VOL1 BLT_PWR1 BKT_PWR1 HDLED RESET PANEL1 PCIE1 IMB-1007J DACC1 SIO_AT1 JGPIO_SET1 CLRMOS1 CLRMOS2 BLT_PWM1 BLT_PWM2 28 27... - Page 10 IMB-1007J 1 : M.2 Key-M Socket (M2_M1) 2 : M.2 Key-E Socket (M2_E1) 3 : USB 2.0 Header (USB2_5_6) 4 : SATA3 Connector (SATA3_0) 5 : SATA Power Output Connector (SATA_PWR1) 6 : 4-pin Power Connector (ATX12V1) 7 : CPU FAN Connector (+12V) (CPU_FAN1)
-
Page 11: I/O Panel
1.4 I/O Panel RJ45 LAN Port (LAN1)* COM Port (COM4) (RS-232) RJ45 LAN Port (LAN2)* 10 COM Port (COM2) (RS-232) COM Port (COM1) (RS-232/422/485)** 11 USB 2.0 Ports (USB2_3_4) COM Port (COM3) (RS-232) Top: USB2_4 HDMI Port (HDMI2) Bottom: USB2_3 Audio Output : Green –... - Page 12 IMB-1007J * There are two LEDs next to the LAN1, 2 ports. Please refer to the table below for the LAN1, 2 ports LED indications. LAN1, 2 Port LED Indications ACT/LINK SPEED Activity/Link LED SPEED LED Status Description Status Description...
-
Page 13: Block Diagram
1.5 Block Diagram IMB-1007J SO-DIMM LVDS/eDP LVDS/eDP Channel A Chrontel DDR5 By pass mode CH7513 PCIe Gen3 x1 HDMI PCIe x1 slot Connector SATA x1 SATA Port HDMI Connector PCIe Gen3 x1 CNVI M.2 Key E USB 3.2 Gen2 x2 USB 3.2 Gen2... -
Page 14: Chapter 2 Installation
IMB-1007J Chapter 2 Installation This is a Mini-ITX (6.7-in x 6.7-in x 1.6-in, 17.0 cm x 17.0 cm x 4.0 cm) form factor mother- board. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. -
Page 15: Installation Of Memory Modules
2.3 Installation of Memory Modules IMB-1007J provides one 262-pin DDR5 (Double Data Rate 5) SO-DIMM slot, and supports Single Channel Memory Technology. Please make sure to disconnect the power supply before adding or removing SO- DIMMs or the system components. - Page 16 IMB-1007J Open the DIMM slot latches. Aligh the notch. Carefully press down until the DIMM slides into the slot. The latches snap back into place.
-
Page 17: Expansion Slots
2.4 Expansion Slots There are one PCI Express Gen3 slot and two M.2 sockets. PCIE slot: PCIE1 (PCIe x1 slot) is used for PCIe Gen3 x1 lane width card. M.2 sockets: 1 x M.2 (Key E, 2230) with PCIe x1, USB 2.0 and CNVi for Wireless 1 x M.2 (Key M, 2242/2280) with PCIe Gen3 x1 or SATA3 for SSD M.2 Key-M Socket M.2 Key-E Socket... -
Page 18: Jumpers Setup
IMB-1007J 2.5 Jumpers Setup The illustration shows how jumpers are setup. When the jumper cap is placed on pins, the jumper is “Short.” If no jumper cap is placed on pins, the jumper is “Open. ” The illustration shows a 3-pin jumper whose pin1 and pin2 are “Short”... - Page 19 Clear CMOS Headers Setting Description Normal (Default) (see p. 4, No. 16) Clear CMOS (3-pin CLRMOS1) NOTE: CLRMOS1 allows you to clear the data in CMOS. To clear and reset the system param- eters to default setup, please turn off the computer and unplug the power cord from the power supply.
- Page 20 IMB-1007J Chassis Intrusion Headers (see p. 4, No. 19) Setting Description (2-pin CI1) Short Active Case Open Open Normal (Default) Setting Description (2-pin CI2) Short Normal (Default) Open Active Case Open This motherboard supports CASE OPEN detection feature that detects if the chassis cover has been removed.
-
Page 21: Onboard Headers And Connectors
2.6 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause per- manent damage to the motherboard! USB 2.0 Header Signal Name Signal Name USB_PWR... - Page 22 IMB-1007J CPU Fan Connector (+12V) Signal Name (4-pin CPU_FAN1) +12V (see p. 4, No. 7) CPU_FAN_SPEED FAN_SPEED_CONTROL The board offers one 4-pin CPU fan (Smart Fan) connector which is compatible with 3-pin CPU fan. If you connect a 3-pin CPU fan to the CPU fan connector on this motherboard, please connect it to pin 1-3.
- Page 23 LVDS Panel Connector (40-pin LVDS1) * eDP pin definition (switch by BIOS): (see p. 4, No. 10) Signal Name Signal Name Signal Name Signal Name LCD_VCC LCD_VCC LCD_VCC LCD_VCC +3.3V LVDS_A_DATA0# LVDS_A_DATA0 LVDS_A_DATA1# LVDS_A_DATA1 EDP_TX1# EDP_TX1 LVDS_A_DATA2# EDP_TX0# LVDS_A_DATA2 EDP_TX0 LVDS_A_DATA3# LVDS_A_DATA3 LVDS_A_CLK#...
- Page 24 IMB-1007J System Panel Header Signal Name Signal Name HDLED+ PLED+ (9-pin PANEL1) HDLED- PLED- PWRBTN# (see p. 4, No. 17) RESET# This header accommodates several system front panel functions. Connect the power switch, reset switch and system status indicator on the chassis to this header according to the pin assignments below.
- Page 25 SPDIF Header Signal Name (3-pin SPDIF1) (see p. 4 , No. 25) SPDIF OUT SPDIF header, providing SPDIF audio output to HDMI VGA card, allows the system to connect HDMI Digital TV/projector/LCD devices. Please connect the SPDIF connector of HDMI VGA card to this header.
- Page 26 IMB-1007J Front Panel Audio Header Signal Name Signal Name MIC2_L (8-pin HD_AUDIO1) MIC2_R OUT2_R MIC_RET (see p. 4, No. 29) J_SENSE OUT2_L OUT_RET This is line out/microphone interface for front panel audio cable that allows jack detection, convenient connection and control of audio devices.
-
Page 27: Chapter 3 Uefi Setup Utility
Chapter 3 UEFI SETUP UTILITY 3.1 Introduction ASRock Industrial UEFI (Unified Extensible Firmware Interface) is a BIOS utility which offers tweak-friendly options in an advanced viewing interface. The UEFI system works with a USB mouse and offers users a faster, sleeker experience. -
Page 28: Uefi Menu Bar
IMB-1007J 3.1.2 UEFI Menu Bar The top of the screen has a menu bar with the following selections: Main For setting system time/date information For advanced system configurations Advanced H/W Monitor Displays current hardware status Security For security settings Boot... -
Page 29: Navigation Keys
3.1.3 Navigation Keys Use < > key or < > key to choose among the selections on the menu bar, and use < > key or < > key to move the cursor up or down to select items, then press <Enter> to get into the sub screen. -
Page 30: Main Screen
IMB-1007J 3.2 Main Screen When you enter the UEFI SETUP UTILITY, the Main screen will appear and display the system overview. Because the UEFI software is constantly being updated, the following UEFI setup screens and descriptions are for reference purpose only, and they may not exactly match what you see on your screen. -
Page 31: Advanced Screen
3.3 Advanced Screen I n t h i s s ec t ion, you may s et t he con f ig u r at ions for t he fol low i ng items: CPU Configuration, Chipset Configuration, Storage Configuration, Super IO Configuration, ACPI Configuration, USB Configuration, and Trusted Computing. -
Page 32: Cpu Configuration
IMB-1007J 3.3.1 CPU Configuration Active Processor E-Cores This allows you to select the number of E-Cores to enable in each processor package. NOTE: Number of P-Cores and E-Cores are looked at together. When both are {0,0}, Pcode will enable all cores. - Page 33 CFG Lock The option allows you to enable or disable the CFG Lock. Configuration options: [Enabled] [Disabled] Intel Virtualization Technology Intel Virtualization Technology allows a platform to run multiple operating systems and applications in independent partitions, so that one computer system can function as multiple virtual systems.
- Page 34 IMB-1007J Power Limit 1 "Power Limit 1 in Milli Watts. BIOS will round to the nearest 1/8W when programming. 0 = no custom override. For 12.50W, enter 12500. Overclocking SKU: Value must be between Max and Min Power Limits (specified by PACKAGE_POWER_SKU_MSR). Other SKUs: This value must be between Min Power Limit and Processor Base Power (TDP) Limit.
-
Page 35: Chipset Configuration
3.3.2 Chipset Configuration VT-d Intel® Virtualization Technology for Directed I/O helps your virtual machine monitor better utilize hardware by improving application compatibility and reliability, and providing additional levels of manageability, security, isolation, and I/O performance. Configuration options: [Enabled] [Disabled] Re-Size BAR Support If system has Resizable BAR capable PCIe Devices, this option enables or disables Resizable BAR Support. - Page 36 IMB-1007J Share Memory Share memory allows you to configure the size of memory that is allocated to the integrated graphics processor when the system boots up. Configuration options: [Auto] [32M] [64M] [128M] [256M] [512M] Options vary depending on the memory you use on your motherboard.
-
Page 37: Storage Configuration
3.3.3 Storage Configuration SATA Controller(s) The option allows you to enable or disable the SATA controllers. Configuration options: [Enabled] [Disabled] SATA Mode Selection AHCI supports new features that improve performance. Configuration option: [AHCI] Hybrid Storage Detection and Configuration Mode The option allows you to select Hybrid Storage Detection and Configuration Mode. Configuration options: [Dynamic Configuration for Hybrid Storage Enable] [Disabled] SATA Aggressive Link Power Management SATA Aggressive Link Power Management allows SATA devices to enter a low power state... - Page 38 IMB-1007J Hard Disk S.M.A.R.T. S.M.A.R.T stands for Self-Monitoring, Analysis, and Reporting Technology. It is a monitoring system for computer hard disk drives to detect and report on various indicators of reliability. Configuration options: [Enabled] [Disabled]...
-
Page 39: Super Io Configuration
3.3.4 Super IO Configuration COM1 Configuration Use this to set parameters of COM1. Type Select Use this to select COM1 port type: [RS232], [RS422] or [RS485]. COM2 Configuration Use this to set parameters of COM2. COM3 Configuration Use this to set parameters of COM3. COM4 Configuration Use this to set parameters of COM4. -
Page 40: Acpi Configuration
IMB-1007J 3.3.5 ACPI Configuration Suspend to RAM Suspend to R A M a l lows you to select [Disabled] for ACPI suspend t y pe S1. It is recommended to select [Auto] for ACPI S3 power saving. Configuration options: [Auto] [Disabled]... -
Page 41: Usb Configuration
3.3.6 USB Configuration USB Power Control Use this option to control USB power. -
Page 42: Trusted Computing
IMB-1007J 3.3.7 Trusted Computing NOTE: Options vary depending on the version of your connected TPM module. Security Device Support Security Device Support allows you to enable or disable BIOS support for security device. O.S. will not show Security Device. TCG EFI protocol and INT1A interface will not be available. - Page 43 SM3_256 PCR Bank SM3_256 PCR Bank allows you to enable or disable SM3_256 PCR Bank. Configuration options: [Enabled] [Disabled] Pending Operation Pending Operation allows you to schedule an Operation for the Security Device. NOTE: Your computer will reboot during restart in order to change State of the Device. Configuration options: [None] [TPM Clear] Platform Hierarchy This item allows you to enable or disable Platform Hierarchy.
-
Page 44: Hardware Health Event Monitoring Screen
IMB-1007J 3.4 Hardware Health Event Monitoring Screen This section allows you to monitor the status of the hardware on your system, including the parameters of the CPU temperature, motherboard temperature, CPU fan speed, and the critical voltage. NOTE: Options vary depending on the features of your motherboard. -
Page 45: Security Screen
3.5 Security Screen In this section you may set or change the supervisor/user password for the system. You may also clear the user password. Supervisor Password Set or change the password for the administrator account. Only the administrator has the authority to change the settings in the UEFI Setup Utility. -
Page 46: Boot Screen
IMB-1007J 3.6 Boot Screen This section displays the available devices on your system for you to configure the boot settings and the boot priority. Boot From Onboard LAN The item allows the system to be waked up by the onboard LAN. -
Page 47: Exit Screen
3.7 Exit Screen Save Changes and Exit When you select this option, the following message “Save configuration changes and exit setup?” will pop out. Select [Yes] to save the changes and exit the UEFI SETUP UTILITY. Discard Changes and Exit When you select this option, the following message “Discard changes and exit setup?”...
Need help?
Do you have a question about the IMB-1007J and is the answer not in the manual?
Questions and answers