Installation; Deinstallation - Omron SENSOR SUPPORT SOFTWARE S3 Operation Manual

Installation

3-1 Installation
3-2

Deinstallation

12
Take the following steps before installing the SensorSupportSoftware on the
hard disk:
• Check the PC in relation to the system requirements.
• Check whether you have the latest version of the SensorSupportSoft-
ware. The latest version can be downloaded free of charge from the Inter-
net page http://www.eu.omron.com.
• Switch on the PC and start WINDOWS
• Insert the SensorSupportSoftware installation CD in the CD drive and
close the CD drive.
• The installation routine on the SensorSupportSoftware installation CD
starts automatically.
If not:
• Start the WINDOWS
• Start the SETUP.EXE program in the SENSORSUPPORTSOFT-
WARE directory on the CD.
• Follow the instructions in the program.
• After installation of the program, the OMRON\SensorSupportSoftware
program folder is created on the desktop.
• The OMRON\SensorSupportSoftware program group contains the Sen-
sorSupportSoftware.
• After completing installation, remove the SensorSupportSoftware instal-
lation CD from the drive and archive it.
The SensorSupportSoftware can now be started (see SECTION 5 Program
start).
The SensorSupportSoftware can be deinstalled in the Add/Remove Pro-
grams software in the WINDOWS
®
.
®
EXPLORER.
®
Control Panel.
Section 3-1