Basic Settings Tab - Omron SENSOR SUPPORT SOFTWARE S3 Operation Manual

Display window for new sensor settings New settings of E3NT-R
8-5-2

Basic settings tab

8-5-2-1 Application remarks
8-5-2-2 Display at sensor
8-5-2-2-1 Rotating the display by 180°
60
The general parameters of the selected sensor are set in the Basic settings
menu.
In the Application remarks box, you can enter remarks that are saved
together with the settings.
When the file is read again, the remarks again appear in the Application
remarks box.
The type of display on the sensor can be set in the Display at sensor box.
Section 8-5