Upgrading Bar Graphs (Changing The Contents Of Allocated Words) - Omron NT11 - 01-2004 User Manual

Programmable terminal
Hide thumbs Also See for NT11 - 01-2004:
Table of Contents

Advertisement

Memory Table Entries and Bar Graph
5-3-4
Upgrading Bar Graphs
(Changing the Contents of Allocated Words)
Symbol
C-series PLCs
None
IR Area
H
HR Area
A
AR Area
L
LR Area
T
TC Area,
Timer PVs
TU
---
C
TC Area,
Counter PVs
CU
---
W
---
TK
---
D
DM Area
E
*2
EM Area
,
current bank
E0_ to
---
EC_
Reference
The following describes the procedure to upgrade the bar graph display on the
NT11 by changing the contents of the allocated words.
To change the bar graph display on the NT11, change the contents of the PLC
words to which the numeral memory table entries have been allocated.
• Available allocation words
The numeral memory table entries can be allocated to the following PLC
areas:
Allocated Words
Either one or two words can be allocated at the host for each numeral mem-
ory entry. Words can be allocated in the following host (PLC) areas.
Allocation
CV-series PLCs
OK
CIO Area
OK
---
OK
Auxiliary Area
OK
---
1-word
Timer Area,
entries only
Timer PVs
---
---
1-word
Counter Area,
entries only
Counter PVs
---
---
---
---
---
---
OK
DM Area
OK
EM Area,
current bank
---
---
*1: LR 00000 to LR 00199 are converted to CIO 01000 to CIO 01199.
*2: The EM Area is supported only by the C200HX/HG/HE(-Z)E PLCs.
The range of respective area varies with the type of PLC. Refer to Appen-
dix H Special Characters (page 163).
• The bar graph display cannot use hexadecimal numbers. If hexadecimal
numbers are set, the bar graph will not be displayed.
By writing a negative number (whose most significant digit is "F") to the al-
located word of a graph set as "Sign display "No"", the graph display will
become 0% and the % display will show "*** %".
• For the procedure to write numeral values to the allocated words of the
numeral memory table entries, refer to 5-3-1 Allocation Words and Dis-
play of Memory Table Entries (page 117).
Allocation
CS/CJ-series PLCs
OK
CIO Area
---
HR Area
No
AR Area
---
*1
LR Area
1-word
TC Area,
entries only
Timer PVs
---
TC Area,
Timer Completion Flags
Not for Host
TC Area,
Link
Counter PVs
---
TC Area,
Counter Completion Flags
---
WR Area
---
Task Flags
OK
DM Area
Not for Host
EM Area,
Link
current bank
---
EM Area,
EM banks 0 to C
Section 5-3
Allocation
OK
Not for Host
Link
OK
Not for Host
Link
1-word
entries only
No
1-word
entries only
No
Not for Host
Link
No
OK
Not for Host
Link
Not for Host
Link
125

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents