System Configuration; Supported Peripheral Devices - Omron NS - SETUP Setup Manual

1-3 System Configuration

1-3 System Configuration

The following information describes the system configuration using NS-series PTs. Refer to
Appendix 8 Standard Models for details on available models.
1-3-1

Supported Peripheral Devices

Bar Code Reader
Read bar codes as
text string data.
Memory Card
Save screen data or
the system program or
automatically read data
at startup.
Printer (See note 4.)
Connecting a general-purpose color
printer to the USB port on an
NS-series PT makes it possible to
print out the current PT display.
Note 1: Only the following models support Ethernet: NS15-TX01@-V2, NS12-TS01(B)-V@,
Note 2: Only the following models support the Controller Link Interface Unit: NS15-TX01@-V2,
Note 3: The following models support Video Input Units: NS15-TX01@-V2, NS12-TS0@, NS10-TV0@,
Note 4: The NS5-SQ0@(B)-V@, NS5-TQ0@(B)-V@, and NS5-MQ0@(B)-V@ cannot be connected di-
Note 5: Refer to 3-3-2 Connecting via USB for information on connecting the PT and computer with a
Note 6: Only the following monitor is supported: NS15-TX01@-V2.
• PTs (Refer to Appendix 8 Standard Models.)
• Recommended Bar Code Reader (Refer to page 3-15.)
OMRON V520-RH21-6
OMRON V400-H111
OMRON V400-H211
1-8
Host
RS-232C cable (15 m max.)
RS-422A cable (500 m max.)
RS-232C/422A Adapter
Ethernet cable (See note 1.)
NS-series PT
NS10-TV01(B)-V@, NS8-TV@1(B)-V@, NS5-SQ@1(B)-V@, NS5-TQ@1(B)-V@, and
VS5-MQ@1(B)-V@.
NS12-TS0@, NS10-TV0@. (The NS8 and NS5 do not support the Controller Link Interface
Unit.)
and NS8-TV@@. (The NS15-TX01-V2 does not support the NS-CA001 and it does not support
video input from the NS-CA002. It does support analog RGB input from the NS-CA002.) (The
NS5 does not support Video Input Units.)
rectly to general-purpose printers.
USB cable.
A USB Relay Cable can be used to place a USB slave connector on the front of the control
panel. Refer to 3-1-3 Mounting the PT to the Control Panel.
Twisted-pair cable
Video Input Unit
(See note 3.)
Controller Link
Interface Unit
Enables
Controller Link
communications
with a host.
(See note 2.)
RS-232C cable
Ethernet cable
(See note 1.)
USB cable
(See note 5.)
VGA cable
Monitor (See note 6.)
Video camera or
Vision Sensor
NTSC/PAL cable
Personal computer
Computer running Windows
CX-Designer