Appendix 6 Preparing Cables For Computer Connection; A-6-1 Connecting Cable Assembly - Omron NS - REV 12 Setup Manual

Appendix 6 Preparing Cables for Computer Connection

Appendix 6
Refer to the following information when preparing the CX-Designer connecting cables.
A-6-1 Connecting Cable Assembly
Wire the RS-232C connector to the DOS or 98-NX computer according to the type, as
follows:
• 25-pin Connector
Computer
Use the following products to assemble the connecting cable.
Name
Connector
Connector
hood
Cable
A-40
Preparing Cables for Computer
Connection
Connector hood
Model
XM2D-2501
XM2A-0901
XM2S-2511
XM2S-0911
AWG28 × 5P IFVV-SB
CO-MA-VV-SB 5P × 28AWG
Shield
Connector hood
25-pin type
Manufactured by OMRON (computer side)
9-pin type
Manufactured by OMRON (PT side)
25-pin type
Manufactured by OMRON (computer side)
9-pin type, mm screws
Manufactured by OMRON (PT side)
Multiconductor shielded cable
Manufactured by Fujikura Densen.
Multiconductor shielded cable
Manufactured by Hitachi Densen.
PT serial port
Details