Advertisement
No programming, no software, no problem
MS2800 and MS4800 light curtains are easily configured
using a series of built-in dip-switches. There's no need for
external programming, no problems with operating systems
or interfaces, no set-up console and no complicated menus.
Simplicity itself.
Installation, setup and diagnosis
Every model in the range is pre-wired with a simple M12
all-in-one connector, and fitted with an adjustable rotating
mounting bracket. So it's easy to engineer and entirely
straightforward to install. Alignment is equally fast and
efficient: an innovative system using intuitive LED indicators
MS4800 offers an indicator
for connection via M12 cable/
plug each beam.
Easy to rotate and
stable fixable.
shows whether alignment is correct. This makes adjustment
of the light beams significantly easier than for comparable
light curtains. The MS2800 has separate LEDs for upper and
lower ranges, while the MS4800 has an indicator for
each beam.
MS2800 has 2 LEDs – one
for the upper and one for
the lower range.
Connection via M12
cable/plug.
Advertisement
